Von Duprin Chexit: How Delayed Egress Exit Devices Work and What to Order
Posted by National Lock Supply on Oct 28th 2026
Quick Verdict
A Von Duprin Chexit is an exit device with a motor driven blocking actuator: push the bar and it sounds an alarm and holds the door for 15 seconds, then releases, and it releases immediately on fire alarm. It is designed to meet NFPA 101 "Special Locking Arrangement" and IBC "Special Egress-Control Devices", but whether delayed egress is allowed on a given door is decided by the authority having jurisdiction (AHJ), the occupancy and the adopted code edition. Order the Chexit in the channel the door already uses: CXA98 or CXA99 rim, 27 SVR, 75 mortise or 47 CVR, with -F for labeled fire doors. Then add the cylinder (not furnished), a power supply, fire alarm interface, door signage and, usually, a door position switch. Get AHJ approval before you order.
How does a delayed egress exit device actually work?
Delayed egress trades a short, controlled delay for security on a door that must still serve as a means of egress. NFPA 101 sets the rules most AHJs start from; the essentials, in plain terms:
- The delay: the door releases no more than 15 seconds after the release process starts. The AHJ may approve up to 30 seconds.
- Initiation: the process starts with a push on the release device, without requiring more than 15 lbf or more than 3 seconds of continuous force, and it cannot be reversed once started.
- Alarm: an audible signal sounds at the door when the process starts.
- Fire alarm release: the lock releases on activation of the building's approved automatic sprinkler or fire detection system. The building must have one.
- Power loss release: the lock releases when it loses power.
- Relock: relocking after release is by manual reset at the door.
- Signage: a sign on the door, adjacent to the release device, reading "PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED IN 15 SECONDS" (or 30, where approved).
The Chexit implements those behaviors inside the device. Per the product data, all control inputs, auxiliary locking, local alarm and remote signaling outputs are self-contained in the Chexit assembly, and the standard device keeps the door secured for 15 seconds after an exit attempt with immediate release upon fire. With the Chexit disarmed (for example during business hours), the opening functions as a normal exit device.
Typical uses are retail stock doors, perimeter doors in schools and offices, and secured units in healthcare. The clinical side of that last case, including anti-ligature and resident wandering, is covered in the senior living and behavioral health hardware guide. If the door only needs to alarm and not delay, a Chexit is overkill: see the exit door alarm guide.
None of this is a compliance promise. The AHJ and local code govern every delayed egress opening, and wiring belongs to a qualified technician.
Which Chexit models are available?
The model number is the base Von Duprin device with a CX prefix. CXA98 and CXA99 are the rim versions; in the longer model numbers the digits after 98 or 99 give the channel (27 SVR, 75 mortise, 47 CVR); EO is exit only; -F means fire rated; RGO adds rod guards. The Von Duprin part number guide decodes the rest of the string.
| Model | Device type | Fire rating | Dogging | Order |
|---|---|---|---|---|
| CXA98EO / CXA99EO | Rim, wide stile | No | Hex key | Von Duprin CXA99EO Chexit rim device |
| CXA99EO-F | Rim, wide stile | Fire rated | Not listed | Von Duprin CXA99EO-F fire rated Chexit |
| CXA9827EO RGO / CXA9927EO RGO | Surface vertical rod with rod guards | No | Hex key | Von Duprin CXA9927EO RGO Chexit SVR |
| CXA9927EO-F RGO | Surface vertical rod with rod guards | Fire rated | Per listing | Panic exit device category |
| CXA9875EO / CXA9975EO | Mortise lock | No | Hex key | Panic exit device category |
| CXA9975EO-F | Mortise lock | Fire rated | Less dogging | Panic exit device category |
| CXA9847EO-F / CXA9947EO-F | Concealed vertical rod, metal doors | Fire rated | Less dogging | Von Duprin CXA9947EO-F Chexit CVR |
| CX33AEO | Rim, narrow stile, 36 in. device | No | Hex key, quiet electric latch retraction | Panic exit device category |
All are Grade 1 delayed egress exit devices. The rim CXA99EO is about $3,182 at NLS; the CVR CXA9947EO-F is about $4,401 at NLS.
Pick the channel from the existing door prep, not from preference: changing channel means new door and frame work, so start from the device already on the door and confirm against the Chexit template. The Chexit listings state that cylinders are not furnished and must be specified when ordering: a 1-1/4 in. mortise cylinder with compression ring 36-083 and a straight cam, with Schlage 20-001-114 recommended. Order it on the same PO.
One search trap: Camden CX-ED2079 and CX-ED1579L are electric strikes, not Chexit devices. The CX letters are a coincidence.
For replacement parts on older units, note the date split in the listings: the 040093 CX99 cover plate kit (36 in. to 48 in.) is for devices ordered after 8/17/2015, and the 112018 Chexit wiring assembly is for devices ordered before 8/17/2015. Order the device that matches the prep from the panic exit device category.
What else does a Chexit opening need?
The device is one line on the order. A working, approvable opening needs the components below. The manufacturer's typical application shows a card reader for access, an external horn for added volume and a door position switch, and notes that if card readers are required on both sides of the door, their normally closed contacts are wired in series.
| Required component | Purpose | Example |
|---|---|---|
| Mortise cylinder, 1-1/4 in., straight cam, 36-083 compression ring | Key arm, reset and bypass at the device | Schlage 20-001-114 (recommended in listing) |
| Power supply | Powers the motor actuator and electronics; loss of power releases the lock | Sized per the device's installation data; see the access control power supply guide |
| Fire alarm interface | Immediate release on fire alarm | Relay from the fire alarm control panel, by the fire alarm contractor |
| Delayed egress signage | Code-required door sign | Detex ECL-395 delayed egress sign |
| Door position switch | Reports door left open or forced | See door position switch options |
| Card reader or keypad (optional) | Allows authorized access through the opening | Access control system input |
| External horn (optional) | Louder or remote annunciation | Per manufacturer's application data |
Signage: the Chexit ships with a 6 x 20 in. decal reading "PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED IN 15 SECONDS". Replacement or additional signs are cheap: the Detex ECL-395 is a red, English, 15 second peel and stick sign at about $19 at NLS. If the AHJ approves a 30 second delay, the sign must say 30, not 15.
Power: check the current draw on the specific Chexit installation sheet and size the supply with headroom for the reader and DPS. The fire alarm tie-in is a life safety circuit: coordinate with the fire alarm contractor and do not route it through the access panel in a way that can defeat the release.
When is a delayed egress maglock the better choice?
When the door already has good exit hardware and the goal is to add delay without replacing it. The RCI DE8310 is an all-in-one delayed egress electromagnetic lock for single outswinging doors that detects pressure applied to the door, so the existing hardware stays. Per the listing:
- Field-selectable 15 or 30 second release delay, plus a 0 to 3 second selectable nuisance delay.
- 12 to 24 VDC, fail safe.
- Includes a 914 external sounder, 960 keyswitch for reset and override and a building code sign; the DE8310-S has a built-in sounder instead.
- Red/green status light panel, relay outputs for local or remote monitoring.
- Provision for IBC, NFPA 101 and other model code compliance.
The RCI DE8310 delayed egress maglock is about $1,185 at NLS. Trade-offs: a maglock on an egress door brings its own code questions (the AHJ decides), it only covers single outswing doors in this model, and it needs constant power. A Chexit integrates the delay, alarm and latch into the device the code already recognizes as panic hardware. If the existing exit device is worn out anyway, replace it with a Chexit; if it is in good shape, the DE8310 is the lower cost path.
What goes on the ordering checklist?
- AHJ approval in writing: delayed egress permitted for this occupancy and door, delay time (15 or 30 seconds), fire alarm release method.
- Channel and stile: rim, SVR, mortise or CVR; wide or narrow stile; door width.
- Fire label: labeled door and frame need the -F device.
- Cylinder: 1-1/4 in. mortise, straight cam, 36-083 ring.
- Power supply sized from the installation sheet.
- Fire alarm relay and who provides it.
- Signage matching the approved delay.
- Door position switch, reader and horn if the system design calls for them.
- Finish and handing, read from the listing (rim devices are non-handed; SVR, mortise and CVR listings are field reversible).
Common mistakes
- Ordering before the AHJ approves delayed egress for the occupancy.
- Forgetting the cylinder. It is not furnished with the Chexit.
- Installing a 30 second delay with a 15 second sign, or the reverse.
- Wiring the fire alarm release through a path that can fail locked.
- Using a non-rated Chexit on a labeled fire door.
- Ordering the wrong-era part: check the 8/17/2015 split on cover plates and wiring assemblies.
- Searching "CX" and ordering a Camden CX-ED strike by mistake.
FAQ
How does a Von Duprin Chexit work? Pushing the bar starts an irreversible release process: the device sounds a local alarm and keeps the door secured for 15 seconds, then releases. It releases immediately on fire alarm. When disarmed, it works as a normal exit device.
What is a Chexit device? Chexit (CX) is Von Duprin's delayed egress version of its exit devices, built with a motor driven blocking actuator and self-contained control inputs, alarm and signaling outputs. It is offered in rim, SVR, mortise and CVR versions, including fire rated -F models.
Are Von Duprin Chexit panic bars fire rated? Fire rated Chexit versions carry -F in the model number, for example CXA99EO-F, CXA9975EO-F and CXA9947EO-F. Use them on labeled fire doors; the standard models are for non-rated openings.
What does a delayed egress sign need to say? The standard text is "PUSH UNTIL ALARM SOUNDS. DOOR CAN BE OPENED IN 15 SECONDS", posted on the door adjacent to the release device. If the AHJ approves a 30 second delay, the sign states 30.
Next step
Match the channel to the existing prep and order from the panic exit device category, starting with the CXA99EO Chexit rim device and the Detex ECL-395 sign. Chexit openings are system jobs: send the door schedule and AHJ requirements to the quote desk, and agencies can use government PO intake.
SAME DAY & EXPEDITED SHIPPING AVAILABLE