Commercial Door Catches & Latches
Door catches hold a closet, cabinet, access or pair of doors closed without a lock, so the door stays shut until someone pulls it. Shop Ives 345, 347 and CL21 ball catches, Ives 335 and 336 roller catches, the Trimco 1559WB heavy duty roller latch, Ives and Rockwood magnetic catches and Rockwood pocket door pulls and privacy latches.
Types of door catches
A catch holds a door closed by friction, spring tension or a magnet, with no key and no lever. The 16 products in this category fall into four types, each suited to a different door and use.
| Type | Models in the catalog | Notes from the listing |
|---|---|---|
| Adjustable ball catch | Ives 345, Ives 347, Rockwood 910, Rockwood 911 | Wrought brass or brass; spring tension and clearance adjustment; Ives lists them for cabinets and small interior doors with lower frequency use |
| Multi-way ball catch | Ives CL21, CL21A (4-way), CL22 (3-way) | Strike slides between two stainless steel balls; surface applied or mortised; CL21A for closet and access doors |
| Roller catch or latch | Ives 335, Ives 336, Trimco 1559WB | Nylon roller with adjustable tension; Ives lists 4 to 17 lbs of holding power and higher frequency use |
| Magnetic catch | Ives 325A92, Ives 326, Rockwood 900, Rockwood 901 | Aluminum case; 5 lbs (325A92) and 9 lbs (326) load capacity; 326, 900 and 901 work on single doors or pairs |
| Pocket door hardware | Rockwood 890 pull, Rockwood 891 privacy latch | For 1-3/8" and 1-3/4" doors; 891 turn piece locks to the jamb strike |
Ball catch, roller catch or magnetic catch?
Choose by how often the door is used and how much force should hold it. Ball catches are compact and quiet and suit cabinets, panels and small interior doors used a few times a day. Roller catches have a spring-loaded nylon roller that rides over the strike, and Ives lists the 335 and 336 for higher frequency openings such as closets and service doors; the Trimco 1559WB is listed for hotel closet doors and other high-use doors. Magnetic catches have no moving parts to wear and hold by magnet, which suits doors that should close softly and pairs of doors.
Holding force and adjustment
Most catches here can be adjusted in the field. The Ives 335 and 336 roller catches adjust from 4 to 17 lbs of holding power. The Ives 345 and 347 have an adjustable threaded barrel for door clearance and adjustable spring tension, and the Rockwood 910 and 911 have dual adjustment for door clearance and holding strength. On the CL21, CL21A and CL22 the spring tension on the two balls is adjusted to suit field conditions. Magnetic catches are rated by load: the Ives 325A92 at 5 lbs and the 326 at 9 lbs, and Rockwood lists the 901 as extra heavy duty with a larger body than the 900.
Strike styles and mounting
The strike is the part on the frame or the other door that the catch engages, and its shape decides the mounting:
- Full lip strike: the Ives 335 uses a full lip strike for simple mortising; the 336 uses a box type strike for a neater look.
- Narrow or wide strike: the Rockwood 910 narrow strike mounts on the door with the catch in the jamb, and the 911 wide strike mounts on the jamb with the catch in the door.
- Plate or stud strike: the CL21 has a hexagon stud and the CL21A and CL22 a plate type strike; the 4-way models accept the strike from any direction.
- Surface or mortise: the CL21, CL22 and Ives 326 can be surface mounted or mortised.
Catches for pairs of doors and closets
For a pair of cabinet or closet doors without a center stile, a magnetic catch with several strikes is a simple choice: the Ives 326 and Rockwood 900 and 901 are packed with two short strikes and one long strike and are listed for single doors or pairs. Taller pairs often also need flush bolts on the inactive leaf. For a single closet door that gets heavy use, a roller latch such as the Trimco 1559WB or the Ives 335 holds the door with less wear than a small ball catch.
Pocket door pulls and privacy latches
Pocket doors slide into the wall, so they need flush hardware. The Rockwood 890 is a brass flush pull and the 891 a privacy latch whose turn piece locks to a jamb strike, with an emergency release on the opposite side; both are listed for 1-3/8" and 1-3/4" doors, 2-1/2" x 2-3/4", and the 891 is listed under ANSI A156.14. Rockwood notes they should not be used in caustic environments.
Most requested door catches
The catches our customers look up most often right now:
- Ives 345 Adjustable Ball Catch
- Ives 347 Dual Adjustable Ball Catch, Square Corners
- Ives 335 Roller Catch
- Ives 326 Magnetic Catch
Shop by model: Rockwood 900 heavy duty magnetic catch.
Related categories: commercial builders hardware, door stops and holders and flush bolts and coordinators.
What to have ready when ordering a door catch
- Door type: cabinet, closet, access panel, pair of doors or pocket door.
- How often the door is used and the holding force needed.
- Where the catch and strike will mount: door, jamb or second leaf.
- Door thickness and the clearance between door and frame.
- Finish, such as 626 or US26D satin chrome, US3 bright brass or US10B oil rubbed bronze.
Fitting out a building? Request a quote, and schools and agencies can submit a government or school PO. Orders placed before 3:00 p.m. ET on business days ship the same day after card approval, and ground shipping is free on orders of $450+. Call 718-814-6300 to choose a catch.
The tables and selection notes on this page are compiled by National Lock Supply from the Ives, Rockwood and Trimco catalogs and product listings. Last reviewed: November 2026.
Frequently Asked Questions
What is the difference between a catch and a latch?
A catch holds a door closed by spring tension or a magnet, and a firm pull opens it. A latch has a bolt that engages a strike and is released by a knob, lever, button or turn piece. The Rockwood 891 pocket door privacy latch, for example, locks with a turn piece.
What do you call the catch on a door?
On a closet or cabinet door, the part that holds it shut without a lock is called a catch, such as a ball, roller or magnetic catch, and the part it engages is the strike. On a door with a lockset, the spring-loaded bolt is the latch or latchbolt, and the frame plate it enters is the strike plate.
Can a door catch be used on a fire-rated door?
Not as the latching device. Fire-rated swinging doors need positive latching hardware, such as a listed lockset or exit device, and a ball, roller or magnetic catch is not a positive latch. Catches are meant for non-rated closet, cabinet, access panel and pocket doors.
SAME DAY & EXPEDITED SHIPPING AVAILABLE