Rim Cylinders
A rim cylinder is the key cylinder used on rim exit devices, exit device trims and surface-mounted rim locks; it is held by a back plate with two screws and drives the lock with a flat tailpiece. Shop the Schlage 20-022, Kaba Ilco 7075 in many keyways, Von Duprin 3216, Sargent 34, Falcon 951, Corbin Russwin 3000, Accentra (Yale) and dummy rim cylinders.
What is a rim cylinder?
A rim cylinder is a key cylinder that mounts through the door from the outside and is held in place by a back plate and two long screws on the inside. When the key turns, a flat tailpiece on the back of the cylinder rotates and operates the device behind it. Rim cylinders are used on rim exit devices and their outside trims, rim locks and night latches, and many storefront and alarm devices. Because the tailpiece can be cut to length, one cylinder can suit a range of door thicknesses.
Rim cylinder vs mortise cylinder: which one do you have?
A rim cylinder has a tailpiece and is held by screws from the back, while a mortise cylinder is threaded and screws into the lock body, held by a set screw. If the old cylinder has a flat bar sticking out the back and two screw holes, it is a rim cylinder. If it is threaded on the outside and has a cam, it is a mortise cylinder, and you need our mortise cylinders instead. Searches for a "rim mortise cylinder" usually mean one or the other, so check before ordering.
Tailpiece direction and length
The tailpiece must match the device: a horizontal tailpiece for most rim exit devices and trims, and a vertical tailpiece for some other devices. Schlage lists the 20-021 with a vertical tailpiece cam and the 20-022 with a horizontal tailpiece cam, and Dorma lists the 80R40SC with a long horizontal tailpiece. Tailpieces are usually cut to suit the door thickness and trim, so leave it long until it is test-fitted.
| Brand and model | Keyway or core (as listed) | Notes |
|---|---|---|
| Schlage 20-022 | C, E, EF, F, FG, G, CE, S123, S145, S245 and C124 to C235 keyways | Horizontal tailpiece cam |
| Schlage 20-021 C | C | Vertical tailpiece cam |
| Kaba Ilco 7075, 7076 | Schlage C and E, Sargent LA and LA-LC, Corbin Russwin 60, L4 and D1, Yale 8, Arrow, Kwikset | Screw cap; keyed alike, alike in pairs or different |
| Kaba Ilco 7010DC | None | 1-1/8" dummy rim cylinder |
| Von Duprin 3216 | C (standard) | Standard rim cylinder, 2 keys |
| Sargent 34 | LA | 6-pin; screw pattern for through-bolted Sargent exit devices |
| Falcon 951 | See listing | 6-pin |
| Corbin Russwin 3000-200 | See listing | 6-pin and 7-pin |
| Accentra (Yale) 1109, 1193 | 1109 conventional; 1193 LFIC with core | 6-pin; 1193 also 7-pin in PARA keyway |
| Arrow RC62, Dorma 80R40SC | Arrow; Schlage C | 6-pin (RC62); long horizontal tailpiece (80R40SC) |
Keyways and keying: keyed alike, keyed different, master keyed
The keyway is the shape of the key slot, so match it to your other locks if the cylinder will join a key system. Kaba Ilco 7075 rim cylinders are listed in many manufacturers' keyways, which makes them a common choice when you need a rim cylinder to match existing keys. They come keyed different, keyed alike, or keyed alike in pairs (two cylinders that open with the same key). Factory cylinders such as the Von Duprin 3216 are listed with two keys. For a master key system, order the cylinders through a locksmith or ask us for a quote.
Interchangeable core rim cylinders
An interchangeable core (IC) rim cylinder holds a removable core, so you can rekey by swapping the core with a control key. The Accentra (Yale) 1193 is a large format interchangeable core (LFIC) rim cylinder supplied with the core, and its listing notes control keys are not furnished. For small format cores, see our IC housings and interchangeable cores.
Rim cylinders for exit devices
Most rim exit devices and their outside trims take a rim cylinder, and exit device makers list their own. The Sargent 34 is listed with a 27/32" screw pattern for through-bolted Sargent exit devices, and the Von Duprin 3216 is the standard Von Duprin rim cylinder. Check the trim or device instructions for the cylinder and tailpiece it calls for, and see our panic exit devices for the devices themselves.
Most requested rim cylinders
The rim cylinders our customers look up most often right now:
- Von Duprin 3216 Standard Rim Cylinder
- Sargent 34 LA Rim Cylinder, LA Keyway
- Accentra (Yale) 1193 6 6-pin LFIC Rim Cylinder with Core
- Accentra (Yale) 1109 6 6-pin Rim Cylinder
Shop by model: Schlage 20-022 and Kaba Ilco 7075.
Related categories: cylinders, cores and key blanks, thumbturns, auxiliary rim locks and key blanks.
What to have ready when ordering a rim cylinder
- Device or lock brand and model the cylinder will operate.
- Tailpiece direction (horizontal or vertical) and door thickness.
- Keyway, and keyed alike, alike in pairs or different.
- Conventional cylinder or interchangeable core (LFIC or SFIC).
- Finish, such as 626 satin chrome.
Rekeying a building? Request a quote, and schools and agencies can submit a government or school PO. Orders placed before 3:00 p.m. ET on business days ship the same day after card approval, and ground shipping is free on orders of $450+. Call 718-814-6300 to match a keyway.
The tables and selection notes on this page are compiled by National Lock Supply from manufacturer catalogs and product listings. Last reviewed: November 2026.
Frequently Asked Questions
Are rim cylinders universal?
The mounting style is common, but the keyway, the tailpiece and sometimes the screw pattern differ by brand. A Kaba Ilco 7075 is offered in many keyways, which helps match existing keys, while factory cylinders such as the Sargent 34 or Von Duprin 3216 are made for their own devices.
What is a dummy rim cylinder?
A dummy rim cylinder has no keyway and fills the cylinder hole so the trim looks complete where no key is needed. The Kaba Ilco 7010DC is a 1-1/8" dummy rim cylinder. It is used on exit trims or devices that do not need key operation from outside.
How do I install a rim cylinder?
Insert the cylinder from the outside with the tailpiece through the door, then fasten it from the inside with the back plate and the two connecting screws. Cut the screws and the tailpiece to the door thickness if needed, and check that the tailpiece engages the lock or exit device before you tighten everything.
SAME DAY & EXPEDITED SHIPPING AVAILABLE