Kawneer
Kawneer door hardware is made for Kawneer aluminum entrances and storefront doors. Shop the Kawneer 1686 concealed vertical rod exit device and 1786 rim exit device in 36", 42" and 48" sizes, Arch Classic push/pull packages such as the KW137700, closer arm packages and Kawneer exit device parts.
Kawneer hardware for aluminum entrances
Kawneer is a manufacturer of architectural aluminum entrances, storefront framing and curtain wall, and its door hardware is built to fit those narrow and wide stile aluminum doors. That is why Kawneer hardware is ordered by Kawneer part number (the KW numbers on each listing) and by door size, hand and finish, rather than by a generic lockset grade. The range here focuses on what wears or gets replaced on existing Kawneer entrances: exit devices, their parts and strikes, push and pull hardware, and closer arm packages.
Kawneer exit devices: 1686 concealed rod and 1786 rim
Kawneer exit devices come in two main types in the catalog. The 1686 is a concealed vertical rod exit device: the rods run inside the door stile, which keeps the glass entrance clean. The listings describe it as UL Listed, hurricane impact tested and Florida Product Approved, with a rod adjustment feature. The 1786 is a rim exit device that latches into a strike on the frame or on a removable mullion for pairs of doors. Both are offered in 36", 42" and 48" device sizes, and both have cylinder dogging (CD) versions that hold the latch retracted with a key.
| Kawneer hardware | Type | Sizes or fit | Notes from the listing |
|---|---|---|---|
| 1686 (KW133620 to KW133625) | Concealed vertical rod exit device | 36", 42", 48" | Handed RH/LHR or LH/RHR; CD cylinder dogging versions |
| 1786 (KW133580 to KW133582) | Rim exit device | 36", 42", 48" | Clear aluminum finish; CD versions |
| 1786 mullion and strike (KW133587, KW133588, KW133487) | Removable mullion, frame strike | Mullion up to 8' door | For pairs of doors with rim devices |
| Paneline parts (KW033118, KW233494 to KW233496, KW033435) | Exit device parts | 36", 42", 48" filler plates | Dress cap, pivot stile and lock side filler plates, Allen dogging key |
| Falcon 1690 / 1990 parts (KW033466, KW033530, KW033920) | Rods and strike | Upper rod for 7' door | Kawneer packages for Falcon devices |
| Arch Classic (KW137700 to KW137731) | Push/pull packages | 3'0", 3'6", variable up to 4' | CO-9 or CO-12 pull with CP or CP-II push |
| Closer arms (KW050702, KW050719) | Arm packages | Double acting and single acting | Side load arm and offset arm |
Electrifying a Kawneer exit device
Existing Kawneer 1686 and 1786 devices can be converted to motorized electric latch retraction without replacing the whole device. The catalog lists the KW133649 kit to convert a manual exit device to MEL (motor electric latch retraction) and the KW133650 kit to convert a solenoid exit device to MEL. Electric latch retraction lets an access control system or an automatic operator unlatch the door. Plan power and wiring before ordering.
Kawneer push and pull hardware
Arch Classic push/pull packages put a pull handle on the outside and a push bar on the inside of the door. The listings describe the KW137700 as a CO-9 pull with a CP-II push, including pull handle, push bar and fasteners. Packages are sized for single acting 3'0" and 3'6" doors, with variable size packages up to 4' and pull-only versions for doors with an exit device (KW137730 and KW137731).
Kawneer door locks and cylinders
Many Kawneer entrances lock with a narrow stile deadlock or deadlatch and a mortise cylinder rather than a Kawneer-branded lockset. If you are looking for a Kawneer door lock replacement, measure the lock in the door stile and see storefront deadlatches, storefront bolts and latches and mortise cylinders. For the exit devices, Kawneer cylinder dogging (CD) models take a cylinder to hold the latch back.
Kawneer parts and manuals
For latch mechanisms, center rods, strikes, housings and dogging parts, use the Kawneer parts and accessories category, which is organized by device. The Kawneer product catalog (PDF) we host on our product pages shows the device options and part numbers.
Most requested Kawneer hardware
The Kawneer products our customers look up most often right now:
- Kawneer KW133624 48" 1686 Concealed Exit Device, RH/LHR
- Kawneer KW137700 Arch Classic CO-9 Pull / CP-II Push Package
- Kawneer KW133636 Dogging Device Package for 1686/1786
- Kawneer KW133623 42" 1686 Concealed Exit Device, LH/RHR
- Kawneer KW133581-17 42" 1786 Rim Exit Device
Related categories: Kawneer exit devices, panic exit devices and overhead concealed closers.
What to have ready when ordering Kawneer hardware
- Kawneer KW part number from the old part, label or parts manual.
- Device type (1686 concealed rod, 1786 rim, Paneline) and device size (36", 42" or 48").
- Hand (RH/LHR or LH/RHR) and hex or cylinder dogging.
- Door size and single or double acting for push/pull and closer arms.
- Finish, such as clear aluminum (-17) or black (-29) where listed.
Replacing hardware on several entrances? Request a quote, and schools and agencies can submit a government or school PO. Orders placed before 3:00 p.m. ET on business days ship the same day after card approval, and ground shipping is free on orders of $450+. Send us the KW number and we will confirm the match: call 718-814-6300.
The tables and selection notes on this page are compiled by National Lock Supply from the Kawneer catalog, parts manual and product listings. Last reviewed: November 2026.
Frequently Asked Questions
Is the Kawneer 1686 exit device fire rated?
The listings describe the Kawneer 1686 as UL Listed, hurricane impact tested and Florida Product Approved. Check the specific UL listing for the opening type before using it on a rated door, because a listing for panic hardware is not the same as a fire exit hardware listing.
How do I know which hand my Kawneer exit device is?
Kawneer lists devices as RH/LHR (right hand or left hand reverse) and LH/RHR (left hand or right hand reverse). Stand on the outside of the door: if the hinges are on the right, it is a right hand door. Match that to the listing before ordering a handed device or latch mechanism.
What do the -17 and -29 suffixes mean on Kawneer parts?
The suffix on many Kawneer part numbers is the finish. In the listings, -17 parts are described as clear aluminum finish and the -29 housing cover package as black finish. Order the same suffix as the existing hardware so the finish matches the door.
SAME DAY & EXPEDITED SHIPPING AVAILABLE