Don Jo
Don-Jo makes door reinforcement and protection hardware: the plates and strikes that fix worn openings and harden doors against prying. Shop Don-Jo latch protectors, strikes such as the ST-261 standard ANSI strike and EL-205 extended lip strike, wrap around plates, floor stops and wall bumpers.
What Don-Jo makes
Don-Jo products repair, reinforce and protect commercial doors rather than lock them. In our catalog that means four groups: latch protectors that cover the latch gap on outswing and inswing doors, strikes for the frame, wrap around plates that cover and convert lock preps, and a small range of stops and bumpers. Most products are listed by model with exact dimensions and gauge, which makes them easy to match to an existing door.
| Don-Jo product | Models in the catalog | Notes from the listing |
|---|---|---|
| Out swing latch protectors | LP, ALP, BLP, ELP, MLP, NLP, OSLP, PLP, PMLP, ULP, SLP and others | By length and width; stainless steel (630) versions |
| In swing latch protectors | ILP-206, ILP-212 | For doors that swing in |
| ANSI strikes | ST-161, ST-261, MST-161, MST-261, EH-161, EW-161, BFD-2 | ST-261: 4-7/8" x 1-1/4", 13 gauge |
| Extended lip strikes | EL-102 to EL-205, EST-115, EST-158, MEST-102, MEST-158, 9102 to 9175 | Longer lips; RC = radius corner |
| T-strikes and replacement strikes | 9450, TS-234, ETS-102, ETS-125, ST-214, DS-234-630, TS-100 thimble strike | 9450 adjustable T-strike for cylindrical locks |
| Security strikes | FL-208N, FL-212N, FL-212W6, 2-SDS, AST-21341, AST-21346, AST-21386 | Reinforced strikes; 2-SDS for deadbolts |
| Wrap around plates | 35 models (cylindrical, mortise, double lock, conversion, blank) | See wrap around plates |
| Stops, holders and bumpers | 1504, 1506 base stops; 1440, 1449 floor stops; 1455 door holder; 1406, 1407 wall bumpers; AR-9K adaptor rings | Cast aluminum or brass |
Latch protectors: out swing vs in swing
A latch protector is a plate that covers the gap between the door and the frame at the latch, so the latch cannot be pried or slipped with a tool. Out swing doors, which open toward the outside, expose the latch to the street, and Don-Jo lists many out swing models by length and width, such as the ALP-210 (10" long, 1-1/2" wide, mortised into the door edge with sex nuts and bolts) and the LP-211 (11" long, 3" wide). For doors that swing in, use the ILP-206 or ILP-212 in swing latch protectors.
Strikes: ANSI, extended lip, T and security strikes
Choose a strike by the frame prep and the lock. Standard ANSI strikes, such as the ST-261 (4-7/8" by 1-1/4", 13 gauge), fit standard frame preps. Extended lip strikes, such as the EL-205 (2-3/4" high, 5-9/16" wide), have a longer lip that guides the latch on doors with wide trim or a gap. T-strikes, such as the 9450 adjustable T-strike, suit cylindrical locks in wood frames, and the TS-100 thimble strike is for the bolt of a flush bolt or similar. Security strikes, such as the FL and AST models, reinforce the frame against forced entry.
Wrap around plates
Don-Jo wrap around plates are a large group in our catalog, with 35 models for cylindrical locks, mortise locks, double lock combinations, Simplex and Alarm Lock conversions and blank plates. The full guide to choosing one is on door wrap around plates.
Stops, holders and wall bumpers
Don-Jo also lists cast stops and bumpers: the 1504 (cast aluminum) and 1506 (cast brass) rigid base stops, the 1440 dome and 1449 floor stops in cast brass, the 1455 door holder and the 1406 convex and 1407 concave wrought wall bumpers. Choose a floor or base stop when the door opens into free space, and a wall bumper when the lever would hit a wall.
Most requested Don-Jo products
The Don-Jo products our customers look up most often right now:
- Don-Jo EL-205 Extended Lip Strike
- Don-Jo ST-261 Standard ANSI Strike
- Don-Jo TS-100 Thimble Strike
- Don-Jo ALP-210 Out Swing Latch Protector
Related categories: door latch protectors, latches, strikes and parts and commercial door stops.
What to have ready when ordering Don-Jo hardware
- For latch protectors: door swing (in or out), and the length and width needed.
- For strikes: frame prep (ANSI or other), lip length and lock type.
- For wrap around plates: lock type, backset, door thickness and hole size.
- Finish, such as 630 satin stainless steel.
Repairing doors across a property? Request a quote, and schools and agencies can submit a government or school PO. Orders placed before 3:00 p.m. ET on business days ship the same day after card approval, and ground shipping is free on orders of $450+. Call 718-814-6300 to match a Don-Jo model.
The tables and selection notes on this page are compiled by National Lock Supply from the Don-Jo catalog and product listings. Last reviewed: November 2026.
Frequently Asked Questions
What is a thimble strike?
A thimble strike is a small round strike set into the floor or frame to receive a bolt, such as the bolt of a flush bolt or surface bolt. The Don-Jo TS-100 is listed as a round thimble strike about 1" across.
Is a latch guard the same as a latch protector?
Yes. Latch guard, latch protector and latch shield are names for the same part: a steel plate on the outside of the door that covers the gap between door and frame at the latch, so the latch cannot be pried or slipped. Don-Jo latch protectors are sold by door swing and by length.
Where can I find a Don-Jo catalog?
We host the Don-Jo catalogs on our product pages: the latch protectors catalog, the strike plates catalog and the wrap around plates catalog. Each shows dimensions, finishes and part numbers so you can match a listing.
SAME DAY & EXPEDITED SHIPPING AVAILABLE