Floor Concealed Closers
Floor closers sit in a box under the floor and control the door through a spindle at the pivot, so nothing shows on the door or frame. Shop Grade 1 Dormakaba concealed floor closers: the BTS75VD with adjustable size 1-4 and the BTS80 Series in 1-1/2" offset, 3/4" offset and center hung double acting versions.
What is a floor closer?
A floor closer is a door closer installed in a cement case below the finished floor, with a spindle that connects to the bottom of the door at the pivot point. It closes and controls the door like an overhead closer, but it is hidden, which is why it is used on glass and aluminum entrances, lobbies and doors where a surface closer would spoil the look or get in the way. The door hangs on the floor closer at the bottom and on a top pivot at the head of the frame. Every closer in this category is listed as Grade 1 under ANSI/BHMA A156.4.
Offset vs center hung floor closers
The mounting style is set by where the door pivots, and it must match the door and frame prep.
- Offset pivot. The pivot point is set back from the face of the door, so the door swings one way like a hinged door. The BTS75VD and BTS80D are listed with a 3/4" offset and the BTS80C with a 1-1/2" offset. All three are single acting and handed.
- Center hung. The pivot is in the center of the door thickness, and the door can swing both ways. The BTS80A is listed as center hung and double acting, for aluminum doors and frames.
Single acting vs double acting
A single acting floor closer controls a door that swings in one direction, while a double acting closer lets the door swing both ways and returns it to the center. Double acting floor closers are common on restaurant, hospital and retail doors that are pushed from either side. Choose single acting for entrances that latch into a frame stop, and double acting for swing doors.
Floor closers in the catalog
| Model | Mounting | Acting | Size | Max door weight | Door width (as listed) |
|---|---|---|---|---|---|
| Dormakaba BTS75VD | 3/4" offset | Single, non-hold open | Adjustable 1-4 | 260 lbs. | 2'-0" to 3'-6" interior; 2'-0" to 3'-0" exterior |
| Dormakaba BTS80D SZ4 | 3/4" offset | Single | 4 | 660 lbs. | 2'-6" to 4'-0" interior; 2'-6" to 3'-6" exterior |
| Dormakaba BTS80C SZ4 | 1-1/2" offset | Single, selectable multipoint hold open | 4 | 660 lbs. | 2'-6" to 4'-0" interior; 2'-6" to 3'-6" exterior |
| Dormakaba BTS80A SZ4 | Center hung | Double, aluminum door and frame | 4 | 660 lbs. | 2'-6" to 4'-0" interior; 2'-6" to 3'-6" exterior |
How to size a floor closer: door weight, width and spring size
Size a floor closer by the door's weight and width, and by whether the door is interior or exterior. The spring size sets how much closing force the closer has: the BTS75VD is adjustable from size 1 to 4, while the BTS80 models listed here are size 4. Exterior doors face wind and stack pressure, so the listed maximum door width is smaller for exterior use. If a door is close to the limit, step up to the BTS80, which the listings rate for doors up to 660 lbs.
Hold open and delayed action
Hold open lets the door stay open at a set angle, which helps on doors used for deliveries or heavy traffic. The BTS80C is listed with selectable multipoint hold open, while the BTS75VD is a non-hold open model with no delay. Do not use mechanical hold open on fire-rated or smoke doors that must close on their own; those openings follow NFPA 80 and need hold-open devices that release on alarm.
Spindles, floor coverings and thin slabs
The spindle length must match the floor finish so the door sits at the right height. Dormakaba lists a wide choice of interchangeable spindles for the BTS75V and BTS80 so the closer can be used with almost any floor covering or threshold, and the compact body allows installation in thin slab concrete subfloors. The closers in this category are listed with a 3/4" spindle. Check the closer's installation instructions on the product page for cement case depth and spindle options before the floor is poured.
Floor closer vs overhead concealed closer
Both keep the closer out of sight, but a floor closer sits in the floor and an overhead concealed closer sits in the head of the frame or in the top rail of the door. Floor closers suit glass and pivoted doors, and doors with no room in the header. Overhead concealed closers suit framed doors where the floor cannot be cut. See overhead concealed closers for that option.
Most requested floor closers
The floor closers our customers look up most often right now:
- Dormakaba BTS75VD Concealed Floor Closer, 3/4" Offset, Size 1-4
- Dormakaba BTS80C SZ4 Concealed In-Floor Closer, 1-1/2" Offset
- Dormakaba BTS80D SZ4 Concealed In-Floor Closer, 3/4" Offset
- Dormakaba BTS80A SZ4 Center Hung Double Acting Floor Closer
Related categories: commercial door closers, surface door closers and storefront bolts and latches.
What to have ready when ordering a floor closer
- Mounting: 3/4" offset, 1-1/2" offset or center hung.
- Single or double acting, and the hand for single acting models.
- Door weight, width and height, and interior or exterior use.
- Hold open or non-hold open, and whether the door is fire rated.
- Floor finish and threshold, for the spindle length.
- Existing closer model, if you are replacing one in an existing cement case.
Specifying several entrances? Request a quote, and schools and agencies can submit a government or school PO. Orders placed before 3:00 p.m. ET on business days ship the same day after card approval, and ground shipping is free on orders of $450+. Call 718-814-6300 with your door details and we will help match the closer.
The tables and selection notes on this page are compiled by National Lock Supply from Dormakaba catalogs and product listings. Last reviewed: November 2026.
Frequently Asked Questions
Are floor closers ADA compliant?
A floor closer can be part of an accessible opening if it is adjusted for opening force and closing speed. The ADA 2010 Standards (404.2.8) set closing speed and the opening force limit for interior doors is set in 404.2.9. Adjust the closer on site and confirm the opening with your code official.
Who should install a floor closer?
A floor closer is usually installed by a door hardware installer or glazier, because the cement case has to be set into the floor at the right depth and level, and the door has to be hung on the closer spindle and a top pivot. Replacing a closer body in an existing cement case is simpler than a new installation.
Can a floor closer be used on an exterior door?
Yes, floor closers are widely used on exterior storefront and entrance doors, because they leave the door and frame free of visible hardware. Exterior installations need attention to water and debris in the cement case and to wind load on the door, so size the closer for the door weight, width and exposure.
SAME DAY & EXPEDITED SHIPPING AVAILABLE