Skip to main content

FREE SHIPPING ALL ORDERS $450 AND UP!

SAME DAY & EXPEDITED SHIPPING AVAILABLE

Sidebar
Hex Dogging vs Cylinder Dogging on Exit Devices: Conversion Kits by Brand

Hex Dogging vs Cylinder Dogging on Exit Devices: Conversion Kits by Brand

Posted by National Lock Supply on Oct 26th 2026

Quick Verdict

Hex key dogging holds the pushbar down with a loose Allen-type key that anyone can buy; cylinder dogging does the same with a key from your own master key system. Keep hex dogging where staff turnover is low and nobody minds who dogs the door. Convert to cylinder dogging on schools, retail and multi-tenant buildings where unauthorized dogging leaves an entrance unlatched overnight. Conversion is a kit plus a mortise cylinder: Von Duprin 050115 for 33A/99, 050132 for 35A/98, 040082 with indicator for 3 ft 99 devices, Accentra 715-48 for 48 in. 7000 Series, Adams Rite 31-0265-01-IP on the Adams Rite side. Fire exit hardware cannot be mechanically dogged by either method; dogging kits are non-fire rated parts.

What does dogging do, and where is it not allowed?

Dogging holds the pushbar (or touchbar) in the depressed position so the latch stays retracted. The door then works push-pull with no latching, which suits business hours on a main entrance, a gym during events, or a loading corridor during deliveries. Undogging restores normal latching.

Dogging is a panic hardware feature only. Fire exit hardware, listed to UL 10C and labeled for fire doors, must latch every time the door closes, so it ships "less dogging" and cannot be field-fitted with mechanical dogging. The Von Duprin 040082 and 107813 kits are listed as non-fire rated, and Accentra states cylinder dogging is available on panic-listed exit devices only. Annual fire door inspections under NFPA 80 check that fire-rated doors latch, and a dogged fire door is a finding: see our NFPA 80 annual fire door inspection guide.

If the device label or part number ends in -F, stop: no dogging kit applies. The authority having jurisdiction (AHJ) decides questions about latching on any given opening. For panic devices, order kits and dogging parts from the Von Duprin parts and accessories category.

Hex key or cylinder dogging: what changes in control?

The mechanism inside the device barely changes; who can operate it does.

Hex key dogging is standard on most panic devices. A hex shaft in the rail or center case is turned with a hex key. Keys are commodity items: the Falcon KEY.10020 5/32 in. hex dogging key is listed for Falcon 1490/1590 devices and runs about $43 at NLS for a pack of 10, and Falcon's KEY.101-1 is a single 7/32 in. key. Because any key of the right size works, there is no key control.

Cylinder dogging replaces the hex shaft with a cam driven by a mortise cylinder. Only holders of that keyway (and bitting) can dog or undog the device. The cylinder can be keyed into the building master system, so the facility decides which staff level dogs the entrances.

Indicator. Von Duprin's 040082 kit adds an indicator for dogged status, which speeds the check at lockup.

Method Who can operate it Key control Fire-rated device allowed Typical use
Hex key dogging Anyone with the right size hex key None No Low-risk interiors, light commercial
Cylinder dogging Holders of the cylinder key Master key system No Schools, retail entrances, multi-tenant lobbies
Cylinder dogging with indicator Holders of the cylinder key Master key system, visual status No Entrances checked at lockup by staff
Less dogging No one Not applicable Yes (required on fire exit hardware) Fire-rated doors, stairwells
Electric dogging (ELR) Access system schedule or switch Software and credentials Device-specific, per listing Operator doors, scheduled unlocking

Pick the row by who should be able to dog the door, then order the kit for your device series below.

Which cylinder dogging kit fits which brand?

Kits are series-specific and often length-specific. Read the series on the center case or rail stamp before ordering.

Brand Kit part Fits Notes from the product sheet Order page
Von Duprin 050115 33A and 99 Series Conversion kit; finishes US28, 313, 315, US10, US4, US3, US26 050115
Von Duprin 050132 35A and 98 Series Same finish range as 050115 Von Duprin parts category
Von Duprin 040082 99 Series, 3 ft device Cylinder dogging with indicator; non-fire rated 040082
Von Duprin 107813 CD/SS applications Non-fire rated cylinder dogging kit Von Duprin parts category
Accentra (Yale) 715-48 7000 Series, 48 in. device 630 finish; less cylinder; requires 1-1/8 in. mortise cylinder Accentra parts category
Adams Rite 31-0265-01-IP Adams Rite devices Cylinder dogging assembly; 31-0265-IP is the hex version 31-0265-01-IP
Falcon 19CDK-3 19 Series, 3 ft device Cylinder dogging kit Falcon parts category
Falcon KIT.1197 1690, 1790, 2390 Series Dogging kit, satin aluminum clear anodized Falcon parts category

Von Duprin. The 050115 kit converts a 33A or 99 device and runs about $103 at NLS; the 050132 is its 35A and 98 counterpart. The 040082 kit with indicator is for 3 ft 99 devices and runs about $314. Where the hex shaft itself is worn, the 090040 hex dogging shaft (package of 2) fits 22, 33/35A and 98/99 Series. Prefixes such as CD in a device number are decoded in Von Duprin part numbers explained.

Accentra (Yale). The 715-48 runs about $205 at NLS, fits 48 in. 7000 Series panic devices, and ships less cylinder: order a 1-1/8 in. mortise cylinder with it.

Adams Rite. The 31-0265-01-IP cylinder dogging assembly replaces the hex 31-0265-IP dogging assembly. On new devices, Adams Rite's 8600C concealed vertical rod comes factory prepared for cylinder dogging, which the brand describes as suitable for all non-fire rated Adams Rite exit devices; the C option cannot be combined with any other exit device option.

Kawneer. Kawneer offers cylinder dogging as a device option rather than a kit: the KW133622CD 42 in. 1686 concealed rod device is the cylinder dogging version and requires a 1-5/32 in. diameter mortised 5-pin cylinder with trim.

Sargent. Sargent builds cylinder dogging into the device with the 16- prefix: the 16-8810 rim device ships with a Sargent #41 mortise cylinder, and the 16-8910 mortise device also includes the cylinder.

Order the kit that names your series and length; if no kit names it, order the factory cylinder dogging device.

Which cylinder does a dogging kit need?

The kit holds a cam; you supply the cylinder unless the listing says it is included.

  • Accentra 715-48: 1-1/8 in. mortise cylinder, not included.
  • Adams Rite cylinder dogging: any standard 15/16 in. to 1-1/8 in. length, 1-5/32 in. diameter mortise cylinder with an MS cam, such as the Adams Rite 4036.
  • Kawneer 1686 CD: 1-5/32 in. diameter mortised 5-pin cylinder with trim.
  • Sargent 16-8810: #41 mortise cylinder supplied.

Length depends on how the rail or housing is built, and the cam is what usually goes wrong: a cylinder with the wrong cam turns but does not drive the dogging mechanism. Length and cam selection are covered in our mortise cylinder sizes and cams guide. If the building runs interchangeable cores, confirm an IC housing is available in the length the kit needs before committing.

Order the cylinder on the same PO as the kit, keyed to the system that should control dogging.

What about electric dogging instead of a key?

When the goal is to dog entrances on a schedule, a key of any kind is the wrong tool. Electric latch retraction holds the latch retracted for as long as the access system or a switch keeps it energized. That removes the end-of-day walk with a key and lets the access system relatch every door at once.

ELR costs more and needs power, a power transfer and a controller. Brand-by-brand devices and retrofit kits, including those for Von Duprin 98/99 and Falcon rails, are in our ELR exit devices and retrofit kits guide. If the device has other worn parts, check the full Von Duprin 99 parts breakdown before deciding between a kit and a new device.

For a single entrance dogged by staff, the cylinder kit is the cheaper fix; for a campus, price ELR.

Common mistakes

  1. Ordering a dogging kit for a fire-rated (-F) device. Fire exit hardware ships less dogging and must latch.
  2. Ordering 050115 for a 98 device. The 98 and 35A take 050132.
  3. Ordering the 040082 for a 4 ft device; it is listed for 3 ft 99 devices.
  4. Forgetting the cylinder for kits sold less cylinder, such as the Accentra 715-48.
  5. Using a cylinder with the wrong cam, so the key turns but the device does not dog.
  6. Assuming any hex key fits: Falcon lists 5/32 in. (KEY.10020) and 7/32 in. (KEY.101-1) keys.
  7. Keying the dogging cylinder to the general change key level when only managers should dog entrances.

FAQ

What is cylinder dogging? A dogging method where a mortise cylinder and cam, instead of a hex key, hold the pushbar down and keep the latch retracted. Only holders of that cylinder's key can dog or undog the device.

What size is a dogging key? It depends on the device. Falcon lists a 5/32 in. hex dogging key for its 1490/1590 devices and a 7/32 in. single key. Check the device brand before ordering.

Can you add cylinder dogging to a Von Duprin 99? Yes, on panic devices: the 050115 kit fits 33A and 99 devices, and the 040082 adds an indicator on 3 ft 99 devices. Fire-rated 99 devices are not dogged.

What is the Adams Rite dogging mechanism part number? The hex version is the 31-0265-IP dogging assembly and the cylinder version is the 31-0265-01-IP. Adams Rite cylinder dogging takes a 1-5/32 in. diameter mortise cylinder with an MS cam.

Next step

Read the series and length off the device, confirm it is not fire rated, then order from the Von Duprin parts and accessories category: the 050115 conversion kit, the 040082 kit with indicator or the Adams Rite 31-0265-01-IP. Orders by 3 p.m. ET ship the same day; $450 and up ships ground free. For a building-wide conversion with keyed cylinders, use the quote desk, or government PO intake for agencies.