RCI DKPS-2A Power Supply, 110-220 VAC Input at 50/60Hz, 8 Outputs 12/24VDC at 2A

RCI DKPS-2A Power Supply, 110-220 VAC Input at 50/60Hz, 8 Outputs 12/24VDC at 2A, Selectable Fail Safe/Secure

The dormakaba DKPS-2A power supply/charger is designed to convert 120-240 VAC, 50 or 60Hz into a continuous 2 Amp supply at 12 or 24VDC power outputs (switch selectable).

Specifications
Input Voltage: 110-220VAC, 50-60Hz 2.4A

Output Voltage: Selectable 12 or 24 VDC voltage outputs; each output max 2.0 A with electronic over-current protection set at 2 Amp. 8 voltage outputs

Dimensions
Power Supply Board: 7-11/16” x 4- 5/16” (195mm x 110mm)
Power Distribution Controller Board: 7-3/8” X 3 1/2” (187mm x 90mm)
Metal Enclosure: 13- 5/16” x 17- 5/8” x 4- 5/16” (338mm x 448mm x 110mm)

Operating temperature: 32º to 120º F (0º to 49º C)

Stand-by Battery: Application dependent. Auto switchover upon AC failure; Built in 1.5 Amp charger with current test every 48 hrs

Capacity: Enclosure supports two (2) 12VDC-7 amp-hour (AH) batteries

Type: Sealed lead acid or gel cell

AC Power Fail: Form C dry contact relay (Relay contacts rated 28VDC, 300mA)

Battery: Form C dry contact relay (Relay contacts rated 28VDC, 300mA)

Cover LED Indicators: Green: AC power; Blue: DC power; Yellow: Battery charger & fault

Enclosure Tamper Switch: 
Optional, sold separately, Normally Closed
Cover tamper part No: DKPS-TSW1-02
Cover and wall removal tamper part No: DKPS-TSW2-02

Certifications
UL294 6th Edition Listed for access control power supply CAN/ULC-60839-11-1; CAN/ULC-S533
FCC Compliant; ISED(IC) compliant
CE compliance EMC Directive 2014/30/EU

Warranty
Limited lifetime

Model: RCI DKPS-2A