PHI Precision FL5201 Fire Rated Surface Vertical Rod Exit Device, Exit Only

PHI Precision FL5201 Fire Rated Grade 1 Surface Vertical Rod Exit Device, Exit Only Function, Less Dogging

Trim Function: No trim - Exit Only

Door Sizes: 36" For 2'-7" to 3' Width - 48" For 3'-1" to 4' Width

Height:
7' - For 7’-0" doors
8' - For 8’-0" door Heights
10' - For 10’-0" door Heights

Fasteners: Furnished standard with machine screws and full thread wood/sheet metal screws.

Doors: For all types of single and double doors with a mullion. Available for 1-3/4" to 2-1/4" thick, up to 4-0" wide by 10'- 0" high openings. Furnished standard for 1-3/4" thick, 3'-0" wide by 7'- 0" high openings.

Handing: Reversible

Active Case & Trim: Covers ANSI A115.2 (Type 161) or ANSI A115.18 cylinder lock preparation. Active case through bolts in ANSI A115.18 preparation without additional machining

Active Case Cover, Latch Covers & Endcap: High Impact Thermoplastic

Active Case & Touchbar Sub-Assembly: Zinc Dichromate plated Heavy Wrought Steel.

Touchbar Assembly: Powder Coated Heavy Wrought Steel.

Vertical Rods: Powder Coated Steel.

Bottom Bolt: Steel plated, independent action. 5/8" throw, with adjustment range to suit 3/4" door undercut.

Top Strike: No. S300, Investment Cast Stainless Steel, Black Powder Coated.

Bottom Strike: No. S460, Steel, Black Powder Coated, flush mounted

Dogging: Less Dogging

Top Latchbolt: Stainless Steel, Deadlocking, 3/4" throw.

Touchbar Height: 40-5/16" from floor standard. Specify required height if other than standard.

Reversible: Reversible for all functions and trims. Standard packaging RHRB.

UL Listed: Panic and Fire Exit Hardware. Conforms to UL10C and UBC 7-2.

ANSI/BHMA: Devices are BHMA certified for ANSI 156.3, Grade 1

Finishes: 689 Aluminum Powder Coat, 695 Dark Bronze Powder Coat

Touchbar Monitoring
Available for all Precision Series Devices. The Touchbar Monitoring Switch is an internally mounted switch that is used to signal electromagnetic locks, horns, monitoring stations or other electronic components.
• UL Listed for Panic and Fire for Class II Circuitry.
• TS and TDS can be used in combination with all options.

TS (SPDT - Single Pole, Double Throw) version allows for interface with one external component. A (2) wire power transfer is required, not furnished standard.

TDS (DPDT - Double Pole, Double Throw) version allows for interface with two external components. A (4) wire power transfer is required, not furnished standard

Electrical Ratings
TS: Switch rated to 2 Amps at 24VDC SPDT
TDS: Switch rated to 2 Amps at 24VDC DPDT

Model: PHI Precision FL5201 689 36, FL5201 689 48, FL5201 695 36, FL5201 695 48