Von Duprin QEL9927EO-F Surface Vertical Rod Exit Device, Quiet Electric Latch

Grade 1 Surface Vertical Rod Exit Bar, Exit Only, Fire Rated, Motorized Latch Retraction, Field Reversible

Quiet electric latch retraction (QEL)
Quiet electric latch retraction (QEL) provides electronic control of an exit device for environments
where limited operational noise is desired. These devices always provide mechanical egress. The
electrified latch retraction can also be activated by an access system or building automation system to unlatch the
exit device momentarily. Often the QEL is used with a credential reader and access control system to unlock the
door momentarily for authorized users.

The QEL can also be configured to electronically retract the latch for an extended period of time to allow free entry.
This is a convenient alternative to mechanical dogging.

The QEL option is available on panic devices and fire rated devices. UL approved for Class II circuit applications.

The QEL option does not include the power transfer from door to frame, the power supply, or the control operator.
Refer to EPT-2 power transfer and the PS902 or 914 power supply.

The PS902/914 with the 2RS, 4RL or 4R board is the minimum required. Other option boards available for other functions,
see PS902/914 power supply for additional information.

The QEL has a low in rush current, so it can be used with standard Schlage power supplies. Calculate the
peak current draw of all devices in the system to determine the required amperage of the supply.

The -2RS option board is designed to control two electric latch retraction devices and provide time delay between the
firing of outputs is required. The power transfer is also sold separately.

QEL Electrical load
Voltage - 24VDC
Current - 1.0 A Inrush (0.5 sec.) / 0.14 A Holding

Electric latch retraction (EL)
The Electric latch retraction (EL) option provides electronic control of an exit device using a powerful,
continuous duty solenoid. If manual dogging is required, special center case dogging is also available
for 98/99 rim and vertical systems, specify SD-EL. SD-EL is not available on 9875 or 9975 devices.
UL approved for Class II circuit applications.

The EL option does not include the power transfer from door to frame, the power supply, or the control operator.
Refer to EPT-2 power transfer and the PS914 power supply.

The PS914 with the 9002RS option card is the minimum option card required. Other option cards available
for other functions, see PS914 power supply for additional information.

Solenoid specifications:
Continuous duty – 24 VDC
Current inrush – 16 amps
Current holding – 0.3 amps

Solenoid resistance:
-grn-yel 1.2 – 2.2 OHMS
-grn-org 100 – 150 OHMS

Specifications

Device functions: EO - Exit Only

Device lengths: 3' 2'4' to 3' (711mm to 914mm) Door size - 4' 2'10" to 4' (864mm to 1219mm) Door size

Device centerline from finished floor: 39 5⁄8" (1006 mm)

Center case: 8" x 2 3⁄4" x2 3⁄8" (203mm x 70mm x 60mm)

Mechanism case: 2 1⁄4" x 2 1⁄4" (57mm x 57mm)

Projection: Pushbar neutral – 3 13/16" (97mm) Pushbar depressed – 3 1/16" (78mm)

Latch bolt: Deadlocking anti-friction top and bottom bolt, 5⁄8" (16mm) throw

Door undercut: 1⁄4" (7mm) recommended

Top and bottom latch case: 4 1⁄2" x 2 1⁄8" x 1 1⁄2" (114mm x 54mm x 38mm)

Vertical rods: 1⁄2" square tubing, standard rods accommodate 7'(2134mm) doors. Top rod length: 34 15⁄16" (887mm);
Bottom rod length: 31 1⁄2" (794mm). Extension rods available in 3' (914mm) for doors over 7'
One piece top rod is available for 8' (2438mm) and 10' (3048mm) doors

Feature: Features grooved mechanism case

Finishes: 605 - Brights Brass, 606 - Satin Brass, 612 - Satin Bronze, 625 - Bright Chrome, 626/626AM - Satin Chrome,
628 - Satin Aluminum Clear Anodized, 710 - Dark Bronze Anodized Aluminum,711 - Black Anodized Aluminum
and 643E - 643E - Aged Bronze (619 and 630 available with 98 Series only)

Fasteners and sex bolts: Includes screw pack for 1 3⁄4" (44mm) to 2 1⁄4" (57mm) thick metal or wood doors, and 325 SNB for top and
bottom latch.

Model: Von Duprin QEL9927EO-F 3 US28, QEL9927EO-F 3 26D, QEL9927EO-F 3 313, QEL9927EO-F 3 315, QEL9927EO-F 3 US3, QEL9927EO-F 3 643E, QEL9927EO-F 3 32D, QEL9927EO-F 4 US28, QEL9927EO-F 4 26D, QEL9927EO-F 4 313, QEL9927EO-F 4 315, QEL9927EO-F 4 US3, QEL9927EO-F 4 643E, QEL9927EO-F 4 32D