SDC WPT Wireless Power Transfer Device

SDC WPT Wireless Power Transfer Device, 600MA@12VDC, 300MA@24VDC, Transfer of Latchbolt Monitoring, REX or Data Signals

SDC’s WPT uses a radio frequency (RF) transmitter to send energy wirelessly across the door gap to a RF receiver that converts the energy to DC voltage - to power electrified locks and latches. Retrofitting electrified locks into openings with existing wood doors is simpler and less time consuming – core drilling the door is not required. Works well with steel doors, too.

Plus, unlike competitive wireless power transfer devices that use magnetic induction for the power transfer, the WPT’s RF technology also allows for transfer of data signals.

The WPT eliminates unsightly, exposed wires across the door gap that are susceptible to vandalism or breakage through use over time and includes a timed trigger to allow for up to 90 seconds of sustained voltage, if required. The WPT transfers power wirelessly across door gaps up to 7mm (a little over 1/4”) and provides more tolerance in lining up the transmitter and receiver vertically and horizontally than inductive power transfer devices.

Features
• No door core drilling
• RF transmits energy to be converted to DC voltage
• Transfers data signals: REX or latch status
• Door position status (DPS)
• Visual status indicator (LED)
• Field selectable dual output voltage
• Flexible installation
• No more broken wires, no moving parts

Specifications
Input Power (Frame Side): 600 mA @ 24 VDC Continuous

Output Power (Door Side): 600 mA @ 12 VDC; 300 mA @ 24 VDC

Maximum Door Gap: 1/4” (7mm)

Maximum Tolerance: Horizontal & Vertical < 5/64” (2mm)
*Maximum tolerance is defined for 3/16” (5mm) door gap

Dry Inputs (Frame Side)
(1) 4 Second Fixed Timer Door Unlock Trigger
(1) 1-90 Seconds Adjustable Door Unlock Trigger

Dry Inputs (Door Side): (2) Relay Activations for REX, DPS, LS, etc

Dry Outputs (Frame Side)
(2) SPDT, 1 Amp @ 30 VDC Resistive
(2) SPST-NO, 100 mA @ 60 VDC Resistive

Operating Environment: -4°F - 140°F

Weight: 1 lb

Applications
• Access Control & Monitoring
• Fail secure electrified locks, latches or other door hardware*
• New or retrofit construction
• Latch side, hinge side or top frame mount
• Up to 1/4” door gap
* WPT is for use with failsecure (power to unlock) locks only. Not intended for contunous dogging or failsafe locks.

Certifications
UL 10C Positive Pressure Fire Tests,
UL 1034 Burglary-Resistant Electric Locking Mechanisms

Model: SDC WPT