SDC PTH-4Q-DPS 4.5" by 4.5" 4 Conductor Power Transfer Hinge w/ Door Status Contact, Satin Stainless Steel Finish

SDC PTH-4Q-DPS PTH Series Power Transfer Hinge, Four (4) Conductor at 1 Amp, with Door Status Contact, 12/24V Per Pair, 4.5" by 4.5" Standard Weight, Satin Stainless Steel

Electric Power transfer hinges provide a concealed and vandal resistant method for running wires from the frame to doors equipped with electric locks and exit devices.

Features
• 4.5' Ft Cable
• UL10B Listed for 3 Hour Fire Rated Doors.
• Wire Replacement Warranty

Specifications
Dimensions: 4-1/2" x 4-1/2"

Cable: 5'

# Wires: 4

Wire Guage: 26 AWG

Current Limit: 1 Amp / wire

Cycle Test: 800,000

Door Position Status (DPS): 250 mA @ 30VDC Resistive

Application
Installed in the center hinge position of the door, PTH power transfer hinges provide the concealed wires required to transfer power from the frame to electric hardware in the door for control and monitoring capability.
• Electric lock power and control
• Door and lock status signaling
• Request-to-exit signaling

Compatible with:
• Electrified mortise locks
• Electrified cylindrical locks
• Electrified exit devices
• Delayed egress exit devices
• Electric trim
• Electric strikes in pair of doors
• Request-to-exit bars

Certifications
UL10C Positive Pressure Fire Tests of Door Assemblies
ULC-S104 Standard Method for Fire Test of Door Assemblies
ANSI/BHMA A156.1

Model: SDC PTH-4Q-DPS