SDC PTH-2-4Q 4.5" by 4.5" 6 Conductor Power Transfer Hinge at 16 Amp Inrush, Satin Stainless Steel Finish

SDC PTH-2-4Q PTH Series Power Transfer Hinge, 16 Amp Inrush, 6 Conductor, 1 Pair 16 Amp Inrush, 4 Amp Continuous, 4.5" by 4.5" Standard Weight, Satin Stainless Steel

Electric Power transfer hinges provide a concealed and vandal resistant method for running wires from the frame to doors equipped with electric locks and exit devices.

For Von Duprin EL 33 and 99 Series Exit Devices and Other High Inrush Devices
The PTH-2-4 hinges have been tested with Von Duprin EL devices and Von Duprin power booster at Underwriters Laboratories.

Features
• 4.5' Ft Cable
• UL10B Listed for 3 Hour Fire Rated Doors.
• Wire Replacement Warranty

Specifications
Dimensions: 4-1/2" x 4-1/2"

Cable: 5'

# Wires: 6

Wire Guage: 18 AWG (2); 28 AWG (4)

Current Limit: 16 Amp Inrush / wire (18 AWG); 4 Amp Continuous / wire (18 AWG)

Cycle Test: 800,000

Application
Installed in the center hinge position of the door, PTH power transfer hinges provide the concealed wires required to transfer power from the frame to electric hardware in the door for control and monitoring capability.
• Electric lock power and control
• Door and lock status signaling
• Request-to-exit signaling

Compatible with:
• Electrified mortise locks
• Electrified cylindrical locks
• Electrified exit devices
• Delayed egress exit devices
• Electric trim
• Electric strikes in pair of doors
• Request-to-exit bars

Certifications
UL10C Positive Pressure Fire Tests of Door Assemblies
ULC-S104 Standard Method for Fire Test of Door Assemblies
ANSI/BHMA A156.1

Model: SDC PTH-2-4Q