Sargent 5556-NB8713 Top Latch Surface Vertical Rod Exit Device w/ Request to Exit Switch and Electric Latch Retraction, Classroom - No trim

Sargent 5556-NB8713 Grade 1 Surface Vertical Rod Exit Device, Wide Stile Pushpad, Fire-Rated Device, For 7 Foot Door Height, Classroom Function, No trim, Less Bottom Rod, Request to Exit Switch, Electric Latch Retraction, Less Dogging

Designed for standard width stile applications on wood or metal doors.

Trim Function: Classroom - No trim
Key outside unlocks/Locks trim

Features
• Single point top latching
• Top latchbolt projection adjustable through center case
• ANSI/BHMA A156.3 - Grade 1
• UL10C (Fire) and UL305 (Panic) Listed
• Tripping potential removed - no bottom strike
• Rods are 1/2" (13mm) brass, bronze or stainless steel

Specifications

Size:
E - 32" (For 24" to 32" doors) - No cutting required for 32" (81cm) door
F - 36" (For 33" to 36" doors) - No cutting required for 36" (91cm) door
J - 42" (For 37" to 42" doors) - No cutting required for 42" (107cm) door
G - 48" (For 43" to 48" doors) - No cutting required for 48" (122cm) door

Dogging Feature: Less dogging

Door Type: Wood or Metal Doors

Door Thickness: 1-3/4" (44mm) minimum thickness

Stile: 4-1/2" (114mm) minimum stile width with trim and 3-1/2" (44mm) minimum stile without trim

Strike: 646 Top Strike (Panic and Fire Rated)
646 Top Strike
• Standard for both Panic & Fire (12-) Hardware
• Surface applied
• Fire Rated
• Black nylon coated

Mounting Fasteners: Supplied standard with wood and machine screws

Top Bolt: Stainless steel

Device Centerline from Finished Floor: 41" (1041mm) for Standard Applications

Door Height: 7 Foot

Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)

Projection: Pushbar Neutral – 3" (76mm). Pushbar Depressed – 2-1/8" (54mm)

55 - Request-to-Exit Option
Switch type SPDT form “C” contacts
• 30 VDC@2 Amp. maximum rating
• All wires run through rail
• Minimum Door Widths:
- Wide Stile Door 24"
- Narrow Stile Door 24"
• See McKINNEY‘s Transfer Device Solutions Catalog for QC Hinge and cable requirements

56 - Electric Latch Retraction Features
• 5 year warranty
• Field serviceable -modular design
• Motor driven latch retraction for smooth, precise operation
• Amount of rail retraction is automatically controlled by the 56- circuitry; System actively monitors its position and adjusts itself
• Digital retraction timer (0-20 seconds; factory setting is 5 seconds)
• Non-contact Request-to-Exit (55-) switch available
• Standard electric hinge - no special power transfer required
• Can be used for continuous and intermittent use
• UL Listed for Class II Circuitry
• Power Requirements: 24VDC regulated/filtered power supply (3500 Series)
• Current draw: .6A during retraction and .25A maintained in dogged hold position
• Requires 1A at 24VDC regulated/filtered power supply
• Available for all 80 Series exit devices (except FM8700)
• Minimum Door Widths:
- Wide Stile Door 28"
- Narrow Stile Door 28"
• See McKINNEY’s Transfer Device Solutions Catalog for QC Hinge and cable requirements
Note: HK- and 16- are not available for Fire Rated Doors
Note: The 56- Option is not supplied with Manual Dogging (Hex Key or Cylinder Dogging) unless specified

Finishes: 32D - Satin Stainless Steel, 10 - Satin Bronze Clear Coated, 4 - Satin Brass, BSP - Black Suede Powder Coat,
3 -Bright Brass, 10B - Dark Oxidized Satin Bronze Oil Rubbed, 32 - Bright Stainless Steel

Model: Sargent 5556-NB8713 RHR 32D, 5556-NB8713 LHR 32D, 5556-NB8713 RHR 3, 5556-NB8713 LHR 3, 5556-NB8713 RHR 4, 5556-NB8713 LHR 4, 5556-NB8713 RHR 10, 5556-NB8713 LHR 10, 5556-NB8713 RHR 32, 5556-NB8713 RHR 32, 5556-NB8713 RHR 10B, 5556-NB8713 LHR 10B