Sargent 5556-NB8710 Top Latch Surface Vertical Rod Exit Device w/ Request to Exit Switch and Electric Latch Retraction, Exit Only

Sargent 5556-NB8710 Grade 1 Surface Vertical Rod Exit Device, Wide Stile Pushpad, For 7 Foot Door Height, Exit Only, Less Bottom Rod, Request to Exit Switch, Electric Latch Retraction, Less Dogging

Designed for standard width stile applications on wood or metal doors.

Trim Function: Exit Only - No Trim

Features
• Single point top latching
• Top latchbolt projection adjustable through center case
• ANSI/BHMA A156.3 - Grade 1
• UL10C (Fire) and UL305 (Panic) Listed
• Tripping potential removed - no bottom strike
• Rods are 1/2" (13mm) brass, bronze or stainless steel

Specifications

Size:
E - 32" (For 24" to 32" doors) - No cutting required for 32" (81cm) door
F - 36" (For 33" to 36" doors) - No cutting required for 36" (91cm) door
J - 42" (For 37" to 42" doors) - No cutting required for 42" (107cm) door
G - 48" (For 43" to 48" doors) - No cutting required for 48" (122cm) door

Dogging Feature: Less dogging

Door Type: Wood or Metal Doors

Door Thickness: 1-3/4" (44mm) minimum thickness

Stile: 4-1/2" (114mm) minimum stile width with trim and 3-1/2" (44mm) minimum stile without trim

Strike: 646 Top Strike (Panic and Fire Rated)
646 Top Strike
• Standard for both Panic & Fire (12-) Hardware
• Surface applied
• Fire Rated
• Black nylon coated

Mounting Fasteners: Supplied standard with wood and machine screws

Top Bolt: Stainless steel

Device Centerline from Finished Floor: 41" (1041mm) for Standard Applications

Door/Opening Height: 120" (3048mm) Max Door Opening

Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)

Projection: Pushbar Neutral – 3" (76mm). Pushbar Depressed – 2-1/8" (54mm)

55 - Request-to-Exit Option
Switch type SPDT form “C” contacts
• 30 VDC@2 Amp. maximum rating
• All wires run through rail
• Minimum Door Widths:
- Wide Stile Door 24"
- Narrow Stile Door 24"
• See McKINNEY‘s Transfer Device Solutions Catalog for QC Hinge and cable requirements

56 - Electric Latch Retraction Features
• 5 year warranty
• Field serviceable -modular design
• Motor driven latch retraction for smooth, precise operation
• Amount of rail retraction is automatically controlled by the 56- circuitry; System actively monitors its position and adjusts itself
• Digital retraction timer (0-20 seconds; factory setting is 5 seconds)
• Non-contact Request-to-Exit (55-) switch available
• Standard electric hinge - no special power transfer required
• Can be used for continuous and intermittent use
• UL Listed for Class II Circuitry
• Power Requirements: 24VDC regulated/filtered power supply (3500 Series)
• Current draw: .6A during retraction and .25A maintained in dogged hold position
• Requires 1A at 24VDC regulated/filtered power supply
• Available for all 80 Series exit devices (except FM8700)
• Minimum Door Widths:
- Wide Stile Door 28"
- Narrow Stile Door 28"
• See McKINNEY’s Transfer Device Solutions Catalog for QC Hinge and cable requirements
Note: HK- and 16- are not available for Fire Rated Doors
Note: The 56- Option is not supplied with Manual Dogging (Hex Key or Cylinder Dogging) unless specified

Finishes: 32D - Satin Stainless Steel, 10 - Satin Bronze Clear Coated, 4 - Satin Brass, BSP - Black Suede Powder Coat,
3 -Bright Brass, 10B - Dark Oxidized Satin Bronze Oil Rubbed, 32 - Bright Stainless Steel

Model: Sargent 5556-NB8710 RHR 32D, 5556-NB8710 LHR 32D, 5556-NB8710 RHR 3, 5556-NB8710 LHR 3, 5556-NB8710 RHR 4, 5556-NB8710 LHR 4, 5556-NB8710 RHR 10, 5556-NB8710 LHR 10, 5556-NB8710 RHR 32, 5556-NB8710 RHR 32, 5556-NB8710 RHR 10B, 5556-NB8710 LHR 10B