Sargent 5556-8904 Mortise Exit Device w/ Request To Exit Switch and Electric Latch Retraction, Night Latch - No trim

Sargent 5556-8904 Grade 1 Mortise Exit Bar, Wide Stile Pushpad, Request To Exit Switch, Electric Latch Retraction, Night Latch Function, No trim, Hex Key Dogging

Specifications

Designed for standard width stile applications on metal doors.

Trim Function: Night Latch - No trim
Key retracts latch bolt

Size:
E - 32" (For 24" to 32" doors) - No cutting required for 32" (81cm) door
F - 36" (For 33" to 36" doors) - No cutting required for 36" (91cm) door
J - 42" (For 37" to 42" doors) - No cutting required for 42" (107cm) door
G - 48" (For 43" to 48" doors) - No cutting required for 48" (122cm) door

Dogging Feature: Less dogging

Door Type: Metal Doors

Door Thickness: 1-3/4" (44mm) minimum thickness. For doors over 1-3/4" to 2 1/4" thick

Stile: 4-1/2" (114mm) minimum stile width

Strike: C908 Standard Black Nylon Coated – ANSI Prep A115.1

Strike Size: 1-1/4" (32mm) lip standard

Mounting Fasteners: Supplied standard with wood and machine screws

Latchbolt: Brass Nickel Plated, 3/4" (19mm) throw, anti-friction

Guarded/DeadLatch: Brass Nickel Plated, sliding type

Device Centerline from Finished Floor: 41" (1041 mm) for Standard Applications; 38" (965mm) for elementary schools

Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)

Projection: Pushbar Neutral – 3" (76mm). Pushbar Depressed – 2-1/8" (54mm)

55 - Request-to-Exit Option
Switch type SPDT form “C” contacts
• 30 VDC@2 Amp. maximum rating
• All wires run through rail
• Minimum Door Widths:
- Wide Stile Door 24"
- Narrow Stile Door 24"
• See McKINNEY‘s Transfer Device Solutions Catalog for QC Hinge and cable requirements

56 - Electric Latch Retraction Features
• 5 year warranty
• Field serviceable -modular design
• Motor driven latch retraction for smooth, precise operation
• Amount of rail retraction is automatically controlled by the 56- circuitry; System actively monitors its position and adjusts itself
• Digital retraction timer (0-20 seconds; factory setting is 5 seconds)
• Non-contact Request-to-Exit (55-) switch available
• Standard electric hinge - no special power transfer required
• Can be used for continuous and intermittent use
• UL Listed for Class II Circuitry
• Power Requirements: 24VDC regulated/filtered power supply (3500 Series)
• Current draw: .6A during retraction and .25A maintained in dogged hold position
• Requires 1A at 24VDC regulated/filtered power supply
• Available for all 80 Series exit devices (except FM8700)
• Minimum Door Widths:
- Wide Stile Door 28"
- Narrow Stile Door 28"
• See McKINNEY’s Transfer Device Solutions Catalog for QC Hinge and cable requirements
Note: HK- and 16- are not available for Fire Rated Doors
Note: The 56- Option is not supplied with Manual Dogging (Hex Key or Cylinder Dogging) unless specified

ANSI/BHMA A156.3 - Grade 1
UL10C (Fire) and UL305 (Panic) Listed

Finishes: 32D - Satin Stainless Steel, 10 - Satin Bronze Clear Coated, 4 - Satin Brass, BSP - Black Suede Powder Coat,
3 -Bright Brass, 10B - Dark Oxidized Satin Bronze Oil Rubbed, 32 - Bright Stainless Steel

Model: Sargent 5556-8904 32D, 5556-8904 3, 5556-8904 4, 5556-8904 10, 5556-8904 32, 5556-8904 10B