Sargent 5556-8715 Surface Vertical Rod Exit Device w/ Request To Exit Switch, Electric Latch Retraction, Passage - No trim

Sargent 5556-8715 Grade 1 Surface Vertical Rod Exit Device, Wide Stile Pushpad, Passage Function, No trim, Request To Exit Switch, Electric Latch Retraction, Less Dogging

Specifications

Designed for standard width stile applications on metal doors.

Trim Function: Passage - No trim
Lever operable always, no cylinder

Features:
• Two point latching (top & bottom with adjustability through center case)
• Standard bottom latch compatible with latch track thresholds (by others)
• Single and double door applications
• ANSI/BHMA A156.3 - Grade 1
• UL10C (Fire) and UL305 (Panic) Listed
• Rods are 1/2" (13mm) brass, bronze or stainless steel
Note: The 8700 Exit Device can not be used less bottom rod. If less bottom rod is desired, specify NB8700 Series Exit Device

Size:
E - 32" (For 24" to 32" doors) - No cutting required for 32" (81cm) door
F - 36" (For 33" to 36" doors) - No cutting required for 36" (91cm) door
J - 42" (For 37" to 42" doors) - No cutting required for 42" (107cm) door
G - 48" (For 43" to 48" doors) - No cutting required for 48" (122cm) door

Dogging Feature: Less dogging

Door Type: Wood or Metal Doors

Door Thickness: 1-3/4" (44mm) minimum thickness

Stile: 4-1/2" (114mm) minimum stile width with trim and 3-1/2" (44mm) minimum stile without trim

Strike: 646 Top Strike (Panic and Fire Rated), 624 Bottom Strike
646 Top Strike
• Standard for both Panic & Fire (12-) Hardware
• Surface applied to frame
• Black nylon coated
• Replaces 629 Strike

624 Bottom Strike
• Standard for 8700
• Applied to surface of floor or to a flat threshold
• Black nylon coated

Mounting Fasteners: Supplied standard with wood and machine screws

Top & Bottom Bolt: Brass, Stainless steel

Device Centerline from Finished Floor: 41" (1041 mm) for Standard Applications; 38" (965mm) for elementary schools

Door Height: 7 Foot

Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)

Projection: Pushbar Neutral – 3" (76mm). Pushbar Depressed – 2-1/8" (54mm)

55 - Request-to-Exit Option
Switch type SPDT form “C” contacts
• 30 VDC@2 Amp. maximum rating
• All wires run through rail
• Minimum Door Widths:
- Wide Stile Door 24"
- Narrow Stile Door 24"
• See McKINNEY‘s Transfer Device Solutions Catalog for QC Hinge and cable requirements

56 - Electric Latch Retraction Features
• 5 year warranty
• Field serviceable -modular design
• Motor driven latch retraction for smooth, precise operation
• Amount of rail retraction is automatically controlled by the 56- circuitry; System actively monitors its position and adjusts itself
• Digital retraction timer (0-20 seconds; factory setting is 5 seconds)
• Non-contact Request-to-Exit (55-) switch available
• Standard electric hinge - no special power transfer required
• Can be used for continuous and intermittent use
• UL Listed for Class II Circuitry
• Power Requirements: 24VDC regulated/filtered power supply (3500 Series)
• Current draw: .6A during retraction and .25A maintained in dogged hold position
• Requires 1A at 24VDC regulated/filtered power supply
• Available for all 80 Series exit devices (except FM8700)
• Minimum Door Widths:
- Wide Stile Door 28"
- Narrow Stile Door 28"
• See McKINNEY’s Transfer Device Solutions Catalog for QC Hinge and cable requirements
Note: HK- and 16- are not available for Fire Rated Doors
Note: The 56- Option is not supplied with Manual Dogging (Hex Key or Cylinder Dogging) unless specified

Finishes: 32D - Satin Stainless Steel, 10 - Satin Bronze Clear Coated, 4 - Satin Brass, BSP - Black Suede Powder Coat,
3 -Bright Brass, 10B - Dark Oxidized Satin Bronze Oil Rubbed, 32 - Bright Stainless Steel

Model: Sargent 5556-8715 32D, 5556-8715 3, 5556-8715 4, 5556-8715 10, 5556-8715 32, 5556-8715 10B