Sargent 1256-8710 Fire Rated Surface Vertical Rod Exit Device w/ Electric Latch Retraction, Exit Only

Sargent 1256-8710 Grade 1 Surface Vertical Rod Exit Device, Wide Stile Pushpad, Fire Rated Device, Electric Latch Retraction, For 7 Foot Door Height, Exit Only, No Trim, Less Dogging

Designed for standard width stile applications on wood or metal doors.

Trim Function: Exit Only - No Trim

Features:
• Two point latching (top & bottom with adjustability through center case)
• Standard bottom latch compatible with latch track thresholds (by others)
• Single and double door applications
• ANSI/BHMA A156.3 - Grade 1
• UL10C (Fire) and UL305 (Panic) Listed
• Rods are 1/2" (13mm) brass, bronze or stainless steel
Note: The 8700 Exit Device can not be used less bottom rod. If less bottom rod is desired, specify NB8700 Series Exit Device

Specifications

Size:
E - 32" (For 24" to 32" doors) - No cutting required for 32" (81cm) door
F - 36" (For 33" to 36" doors) - No cutting required for 36" (91cm) door
J - 42" (For 37" to 42" doors) - No cutting required for 42" (107cm) door
G - 48" (For 43" to 48" doors) - No cutting required for 48" (122cm) door

Dogging Feature: Less dogging

Door Type: Wood or Metal Doors

Door Thickness: 1-3/4" (44mm) minimum thickness

Stile: 4-1/2" (114mm) minimum stile width with trim and 3-1/2" (44mm) minimum stile without trim

Strike: 646 Top Strike (Panic and Fire Rated), 624 Bottom Strike
646 Top Strike
• Standard for both Panic & Fire (12-) Hardware
• Surface applied to frame
• Black nylon coated
• Replaces 629 Strike

655 Bottom Strike
• Standard for 12-8700 and 14-8700
• Stainless steel
• Black nylon coated
• Replaces 647 Strike

Mounting Fasteners: Supplied standard with wood and machine screws

Top & Bottom Bolt: Brass, Stainless steel

Device Centerline from Finished Floor: 41" (1041 mm) for Standard Applications; 38" (965mm) for elementary schools

Door Height: 7 Foot

Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)

Projection: Pushbar Neutral – 3" (76mm). Pushbar Depressed – 2-1/8" (54mm)

56 - Electric Latch Retraction Features
• 5 year warranty
• Field serviceable -modular design
• Motor driven latch retraction for smooth, precise operation
• Amount of rail retraction is automatically controlled by the 56- circuitry; System actively monitors its position and adjusts itself
• Digital retraction timer (0-20 seconds; factory setting is 5 seconds)
• Non-contact Request-to-Exit (55-) switch available
• Standard electric hinge - no special power transfer required
• Can be used for continuous and intermittent use
• UL Listed for Class II Circuitry
• Power Requirements: 24VDC regulated/filtered power supply (3500 Series)
• Current draw: .6A during retraction and .25A maintained in dogged hold position
• Requires 1A at 24VDC regulated/filtered power supply
• Available for all 80 Series exit devices (except FM8700)
• Minimum Door Widths:
- Wide Stile Door 28"
- Narrow Stile Door 28"
• See McKINNEY’s Transfer Device Solutions Catalog for QC Hinge and cable requirements
Note: HK- and 16- are not available for Fire Rated Doors
Note: The 56- Option is not supplied with Manual Dogging (Hex Key or Cylinder Dogging) unless specified

Finishes: 32D - Satin Stainless Steel, 10 - Satin Bronze Clear Coated, 4 - Satin Brass, BSP - Black Suede Powder Coat,
3 -Bright Brass, 10B - Dark Oxidized Satin Bronze Oil Rubbed, 32 - Bright Stainless Steel

Model: Sargent 1256-8710 RHR 32D, 1256-8710 LHR 32D, 1256-8710 RHR 3, 1256-8710 LHR 3, 1256-8710 RHR 4, 1256-8710 LHR 4, 1256-8710 RHR 10, 1256-8710 LHR 10, 1256-8710 RHR 32, 1256-8710 RHR 32, 1256-8710 RHR 10B, 1256-8710 LHR 10B