PHI Precision RPSMLR2BB Power Supply, MLR Kit, With Backup Battery Card and Storage Space

PHI Precicion RPSMLR2BB Power Supply, MLR Kit, Large enclosure for Battery Storage (Batteries not included)

Power Supplies
The PRECISION RPSMLR2 Series is the recommended power source for PRECISION Motorized Latch Retraction (MLR) exit devices. The RPSMLR2 Series provides a code compliant source of filtered and regulated 24 Volt DC power. The RPSMLR2 Series is available in two enclosure sizes and they can each power up to (2) MLR exit devices.

Specifications
Certifications: UL 294 ULC S-319

Input Power: 120 VAC

Input: Fire alarm termination

Output Power
• 2 filtered & regulated 24 Volts DC outputs @ 2 Amps
• Holding current 200mA
• 1 filtered & regulated 24 Volts DC auxiliary output @ 0.8 Amps

Output
2 normal open relay outputs
Outputs can be wired for 2 different modes:
• 1 second delay prior to relay output
• Positive confirmation of latch retraction prior to signaling the operator when used in conjunction with MLR exit device sensor wires

Battery Backup (RPSMLR2BB only)
• Built in charger for sealed lead acid or gel batteries
• Automatically switches to stand-by if AC fails
• Charging current 650mA max
• Batteries are not included

Visual Indicators
• AC power, green LED – Indicates presence of AC power
• Triggered input, 2 red LEDs – Indicates input activation
• Fire alarm interface, green LED – Indicates fire alarm activation
• Battery status, red LED – Indicates low battery during AC power failure

Enclosure Dimensions
• RPSMLR2BB: 13.5”x13”x3.25”

Security: Keyed enclosure

Model: PHI Precision RPSMLR2BB