FREE SHIPPING ALL ORDERS $450 AND UP!
SAME DAY & EXPEDITED SHIPPING AVAILABLE
PHI Precision 2601 Grade 1 Concealed Vertical Rod Exit Device, Narrow Stile Pushpad, Exit Only (Cover Plate Prep) Function, Hex Key Dogging
Trim Function: No trim - Exit Only (cover plate prep)
Door Sizes: 36" For 2'-7" to 3' Width - 48" For 3'-1" to 4' Width
Height:
6'-8" to 8'-0" furnished standard.
8'-1" to 10'-0"
Functions: A Universal Exit Device
Handing: Field Reversible
Dogging: 1/4" turn hex key dogging standard. NOT available on Fire Exit Hardware.
Base Material: Side Filler and End Cap are furnished of heavy wrought Brass, Bronze or Stainless Steel. 628 Devices are furnished with Aluminum, Brass, Bronze and Stainless Steel components
Chassis: Lock Stile Assembly - Investment Cast Steel, Zinc Dichromated.
Top Latchbolt: Stainless Steel, Deadlocking, 3/4" throw.
Bottom Bolt: Steel plated, independent action 5/8" throw, with adjustment range to suit 3/4" door undercut.
Center Chassis: Steel plated, heavy wrought Steel Assembly with lock in place Top and Bottom Latch Adjustors. Adjustment is accessible through the door after installation.
Top Strike: No. S519 Surface applied, Investment Cast Stainless Steel, Black Powder Coated.
Bottom Strike: No. S460, Flush mounted, Steel, Black Powder Coated.
Touchbar Height: 39-15/16" from floor standard.
UL Listed: Panic and Fire Exit Hardware. Conforms to UL10C and UBC 7-2.
ANSI/BHMA: Devices are BHMA certified for ANSI 156.3, Grade 1.
Cylinders: Use 1-1/4” long standard mortise cylinder. Cylinders are not furnished standard.
Finishes: 605, 606, 612, 613, 622, 625, 626W, 628, 630, 690
Electrical Options
ELR - Electric Latch Retraction
The ELR option provides remote Latch Retraction of exit devices. Continuous duty solenoids retract the Latchbolt(s) for momentary unlatching or continuously for dogging. The ELR feature can be interfaced with automatic door operators, card readers, push buttons, toggle/key switches, and fire alarm systems.
Monitoring Switches
TS - Touchbar Monitoring
TS - (SPDT - Single Pole, Double Throw) version allows for interface with one external component. A (2) wire power transfer is required, not furnished standard.
TDS – (DPDT - Double Pole, Double Throw) version allows for interface with two external components. A (4) wire power transfer is required, not furnished standard.
LS – (SPDT - Single Pole, Double Throw) version allows for interface with one external component. A (2) wire power transfer is required, not furnished standard.
LDS – (DPDT - Double Pole, Double Throw) version allows for interface with two external components. A (4) wire power transfer is required, not furnished standard.
Model: PHI Precision 2601 628, 2601 605, 2601 606, 2601 612, 2601 613, 2601 625, 2601 630