LCN 4040XPT-STD Surface Door Closer w/ Track Arm

LCN 4040XPT-STD Grade 1 Track Arm Surface Closer, Push or Pull Side Mounting, 120 Degree Swing, Adjustable Size 1 to 4 (Set to 3), Non-Handed

The 4040XPT is a Grade 1 device featuring a cast iron body and Liquid X Fluid ideal for pull or push side placement in high traffic applications. Its high-quality construction provides for reliable perform.

Features
Body construction
• Cast iron body
• Full complement bearing
• 1-1/2" diameter piston
• Double heat treated pinion journal

Fluid: All-weather Liquid X hydraulic fluid

Handing: Non-handed

Size: Adjustable spring size 1-4

Warranty: 30 years

Cover: Snap-fit plastic cover (PC) with retention fit, standard 

Fasteners: Self reaming and tapping screws (SRT)

Mounting: Pull side on door, pull side top jamb, push side on door

Arms: Standard arm and track with roller

Hinge (pull) side mounting
Butt hinges: Should not exceed 5" (127 mm) in width

Auxiliary stop
• Recommended at hold open point or where a door cannot swing 120°
• Optional track bumper assembly assists back check in cushioning the opening swing of the door
• Track bumper is not intended to replace an auxiliary stop

Reveal: Should not exceed 1/8" (3 mm) for standard arm

Top rail: Less than 3-3/4" (95 mm) requires plate, 4040XPT-18. Plate requires 1-13/16" (44 mm) minimum.

Head frame: Requires 1-1/4" (32 mm) minimum

Clearance: 2-1/4" (57 mm) behind door required for 90° installation

Maximum opening: Templating allows 120° with standard arm, limited to 110° when optional bumper is installed

Top jamb (pull) side mounting
Butt hinges: Should not exceed 5" (127 mm) in width

Auxiliary stop
• Recommended at hold open point or where a door cannot swing 180°
• Optional track bumper assembly assists back check in cushioning the opening swing of the door
• It is not intended to replace an auxiliary stop

Reveal: Should not exceed 1/8" (3 mm)

Head frame: Less than 3-7/8" (98 mm), requires plate, 4040XPT-18TJ. Plate requires 1-3/4" (44 mm) minimum

Clearance: 1-1/4" (32 mm) behind door required for 180° installation

Maximum opening: Templating allows 180° with standard track arm, limited to 110° with optional bumper installed

Stop face (push) side mounting
Butt hinges: Should not exceed 5" (127 mm) in width

Auxiliary stop
• Recommended at hold open point or where a door cannot swing 120°
• Optional track bumper assembly assists back check in cushioning the opening swing of the door
• It is not intended to replace an auxiliary stop

Clearance: Projects 2-1/4" (57 mm) from face of door

Top rail
• Less than 5-1/4" (133 mm) measured from the stop, requires plate, 4040XPT-18
• Plate requires 3-1/2" (89 mm) minimum

Stop width: Minimum 1-1/4" (32 mm)

Maximum opening: Templating allows 120° with standard track arm, limited to 110° with optional bumper tracks

Certifications: Grade 1 - ANSI A156.4, UL 10C, ADA, 100 hour salt spray, meets BAA - Buy American Act

Model: LCN 4040XPT-STD 689, 4040XPT-STD 695, 4040XPT-STD 693, 4040XPT-STD 696