Ives 7212 INT 3/4" Offset Intermediate Pivot used w/ 7212, 7212V and 7222 Pivot Sets

Ives 7212 INT 3/4" Offset Intermediate Pivot, used with Pivot Sets 7212, 7212V and 7222

Used with 7212, 7212V, and 7222 offset pivots, Ives offers 3/4" offset intermediate pivots designed to provide additional support for doors, ensuring compliance with NFPA 80 fire door regulations. These pivots are essential for doors over 7 feet tall or weighing more than the pivot set limit.

3/4" Offset intermediate pivot
NFPA 80, Section 3-3.8 requires intermediate pivot on some fire door applications, consult product support. Use for door heights over 7'0" and one every 2'6" as needed.
• This intermediate pivot is used with 7212, 7212V, and 7222 offset pivots
• Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds.
• Recommended for use with 1 3⁄4" minimum door thickness, with 1 ⁄8" bevel in 2" ƒ
• Handed LH or RH

Specifications
Material substrate: Made from cast brass

Certifications
• Meets ANSI/BHMA A156.4 C07382
• UL10C Listed (3 hour)

Model: Ives 7212 INT RH US26D, 7212 INT LH US26D, 7212 INT RH SP28, 7212 INT LH SP28, 7212 INT RH SP313, 7212 INT LH SP313