Skip to main content

FREE SHIPPING ALL ORDERS $450 AND UP!

SAME DAY & EXPEDITED SHIPPING AVAILABLE

Falcon T571PD A Dormitory Cylindrical Lever Lock, Avalon Style

IN STOCK
$232.55
Price: $594.00
Instant Savings $361.45

FREE SHIPPING

SKU: T571PD A 626
Series: T - Grade 1, extra heavy-duty
Function: 571 - Dormitory/corridor
Lever Style: A - Avalon Lever
Cylinder: P - 6-pin Conventional "G" Keyway (keyed 5)
Backset: 2-3/4" (70mm) (Standard)
Strike: ANSI curved lip
Handing: Non-handed
ANSI Number: ANSI/BHMA A156.2, Series 4000, Grade 1
Choose Options:
Hurry! Only left

Falcon T571PD A Dormitory Cylindrical Lever Lock

Function Description: Dormitory/corridor lock - ANSI NO.F90 
Latch bolt operated by levers/knobs except when locked by push button from inside.
Key in outside lever/knob locks or unlocks lever/knob and releases button.
Closing door releases push button. Inside always free for immediate egress.

Function note:
This lock will unlock when the door is closed. If you want your

door to remain locked when it closes, please purchase the 501 function.

Lever Style: Avalon Lever

Series: T - Grade 1, Extra Heavy-Duty

Door Thickness: 1 3⁄4" to 2 1⁄4" standard. 

Backset: 2 3⁄4" standard. 2 3⁄8", 3 3⁄4" and 5" also available

Handing: Non-handed

Latches: 1⁄2" bolt projection, UL listed with square corner latch faceplate 2 1⁄4" x 1 1⁄8" standard. 

Strikes: 4 7⁄8" x 1 1⁄4" ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.


Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are
stainless steel. compression spring design supports levers, eliminating lever sag and providing years of reliable service.

Attachment: Lock chassis secured to door by threaded
mounting nuts. Preassembled outer trim and inner spindle
assembly are through-bolted over chassis using two (2) 10-32 screws. Adding rose and lever to inner spindle
assembly completes installation.

Cylinders: Conventional cylinder, drilled with 6-pin chambers, pinned in 5 comes standard. Pinning in 6 chambers available
(at no cost) when specified. Optional 7-pin conventional and 6- or 7-pin Small Format Interchangeable Core (SFIC) cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two nickel silver keys furnished standard. See SFIC cylinder information on page 8 and T Series cylinder pages for additional options.

Keyways: “G” keyway standard on conventional cylinders.
“A” keyway standard on SFIC cylinders. Additional options:
Falcon, Schlage and many Best and Arrow keyways.

Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts.

Screws: Furnished with combination screws for use in
wood or metal doors and frames.

ANSI/BHMA: Certified ANSI/BHMA A156.2, Series 4000, Grade 1.

UL: Listed for 3-hour fire door, A label.

PressureRelease™ outside lever disengages when locked to protect internal mechanisms

Model: Falcon T571PD A 626, T571PD A 605, T571PD A 613, T571PD A 625

Italian Trulli

Falcon T Series Catalog

Architectural specifications:

• Key-in-lever cylindrical locksets shall be Falcon lock T Series or equal and meet the following requirements:

• All locks shall meet the ANSI/BHMA A156.2, Series 4000, Grade 1 for key-in-lever locksets.

• Locksets shall be UL Listed (3 hour A Label).

• Locksets shall be provided standard with a clutching lever design. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.

• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be throughbolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner and outer trim shall “bottom out” to prevent door collapse.Roses shall be minimum of 3 1⁄2" diameter.

• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.

• Locksets shall adjust to fit door thickness from 1 3⁄4" to 2 1⁄8".

• All locksets shall be non-handed and notrequire field disassembly for re-handing.

• Preparation for door must be non-handed.

• Acceptable manufacturer: Falcon lock

Free Ground Shipping

orders $450 and up

Easy Returns

no question asked

Quantity Discounts

request a quote

Outstanding Customer Service