FREE SHIPPING ALL ORDERS $450 AND UP!
SAME DAY & EXPEDITED SHIPPING AVAILABLE
Falcon K511LD A Grade 1 Entry/office Cylindrical Lever Lock, Less Conventional Cylinder
Function: Entry/office - ANSI no. F109
Turn/push button locking. Pushing and turning button locks outside lever
requiring use of key until button is manually unlocked. Push button locking.
Pushing button locks outside lever until unlocked by key or by rotating inside
lever. Inside lever always free. Deadlocking latch bolt.
Door thickness: Adjustable 1 3⁄8" to 2 1⁄4". Comes set for a 1 3⁄4" thick door standard.
Backset: 2 3⁄4" standard. 2 3⁄8" optional.
Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance.
Springs are stainless steel.
Attachment: Lock chassis secured to door by threaded mounting screws. Completely preassembled outer trim
and inner spindle assembly are through-bolted both through and over chassis using four (4) screws to provide
strength and resistance to loosening. Adding rose and lever to inner spindle assembly completes installation.
Handing: Locks are non-handed.
Trim: Roses are heavy wrought brass or bronze, installed over pressure cast rose inserts which are through-bolted
through door. Levers are pressure cast (solid levers–no inserts) material finished to match mating parts.
Latches: 2 1⁄4" x 1 1⁄8" square corner with 2 3⁄4" backset comes standard; 2 3⁄8" backset option available if specified. Radius corners for both 2 3⁄8" and 2 3⁄4" backsets available if specified. All latches are UL listed and conform to both
beveled and non-beveled doors.
Strikes: 4 7⁄8" x 1 1⁄4" ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard.
ANSI/BHMA: Meets ANSI/BHMA A156.2, Series 4000, Grade 1.
UL: UL10C 3 hour A label.
Screws: Furnished with combination screws for use in wood or metal doors and frames
Limited Warranty: 10 Year Warranty
Model: Falcon K511LD A 626, K511LD Q 613
Architectural specifications:
• Key-in-lever cylindrical locksets shall be Falcon lock T Series or equal and meet the following requirements:
• All locks shall meet the ANSI/BHMA A156.2, Series 4000, Grade 1 for key-in-lever locksets.
• Locksets shall be UL Listed (3 hour A Label).
• Locksets shall be provided standard with a clutching lever design. When outside lever is locked, it is not rigid but will move freely without operating the latch bolt.
• Lever trim shall have individual heavy-duty compression springs behind rose for lever return and to prevent lever sag. Trim shall be throughbolted with two (2) 10-32 screws coated with thread sealant to provide strength and resistance to loosening. Inner and outer trim shall “bottom out” to prevent door collapse.Roses shall be minimum of 3 1⁄2" diameter.
• All lever designs shall be solid and meet the federal ADA and state disability requirements. Inside levers shall be attached by Allen-head set screw to prevent tampering or vandalism.
• Locksets shall adjust to fit door thickness from 1 3⁄4" to 2 1⁄8".
• All locksets shall be non-handed and notrequire field disassembly for re-handing.
• Preparation for door must be non-handed.
• Acceptable manufacturer: Falcon lock