Dorma 9600 630 Concealed Vertical Rod Exit Device, Narrow Stile, Satin Stainless Steel Finish

Dorma 9600 630 Grade 1 Concealed Vertical Rod Exit Device, Narrow Stile Pushpad, 7' Height, Satin Stainless Steel Finish, Non-handed

Narrow Stile
The 9000 Series narrow stile exit device with a shortened touchbar is the ultimate solution when narrow stile doors require an exit device.

The heavy-duty cast chassis design permits installation on narrow stile doors where a standard device may not fit. The smooth projection touchbar assembly minimizes catch hazards. The partial length touchpad permits field installation of options such as cylinder dogging and exit alarm.

9000 Series narrow stile exit devices are available in a wide range of models and offer a full complement of free wheeling lever trim to meet most narrow stile door applications.

Function: Exit Only – No Trim - ANSI 01

Specification
• All devices to have heavy-duty cast chassis.
• All device touchbar, rail, and cover assemblies shall be constructed of heavy gauge solid wrought materials for true architectural finishes or color coated finishes.
• The partial-length touchpad assembly accommodates field installation of options such as cylinder dogging and exit alarm.
• Non-labeled units to have hex-key dogging standard.
• All devices to have deadlocking latch bolts with 3/4" throw.
• All units shall offer a full range of free wheeling operational trim, except mortise devices.
• All units shall offer optional rigid and clutch-style trim, where applicable.
• All devices to be furnished with appropriate mounting hardware including both wood and machine screws, as well as sex nuts
where required.

9600 Features
• Door Thickness: 1-3/4" to 2-1/4"
• U.L. Listed for Hazard
• Extended Life Cycle Testing
• Device Handed, Not Reversible
• Hex Key Dogging
• Door Height up to 7' Default Vertical Rod

Door Size
• Size BB Doors (27"–36") (touchpad 18-5/8") Default Narrow
• Size AA Doors (32-1/2"–48") (touchpad 24-5/8")

*The 9000 Series narrow stile bar lengths are designed for use on narrow stile aluminum entrance doors with a 1/2” blade stop frame. Other applications may require field cutting the bar.

Motorized Latch Retraction
A motor concealed in the touchbar assembly provides retraction of the latch bolt by drawing in the touch bar to allow access from the secure side of the door. MLR can also be used to electrically dog/hold the exit push bar in a retracted
position during non-secure hours (latch bolt is retracted). Remote control can be accomplished with switching devices such as key switches and card readers that provide a normally open electrical contact. The motor is rated at 24 VDC, 1.5 AMP.

Certification
• Certified/listed to ANSI/BHMA 156.3, Grade 1 for exit devices.
• U.L. and C.U.L. listed under their continuing reinspection programs and conforms to standard U.L. 10C positive pressure testing.
• Complies with NFPA 101 life safety code. Fire rated devices comply with NFPA 80 fire doors and windows.
• Devices, trim, pulls, and levers comply with the Americans for Disabilities Act, 1994, and ICC A117.1 for accessible and usable buildings and facilities.
• Contributes to U.S. Green Building Council, LEED MR Credits 2.1, 4.1, 4.2 and 5.1.
• Listed with the California Department of Forestry and Fire Protection, Office of the State Fire Marshal (wide stile devices
only).
• Hurricane-code approved to Miami-Dade County Florida and Florida State Building Code acceptance (9300, 9400, 9500, 9700).
• Meets the requirements of the California Building Code (2013) Sec. 11B-309.4 (9300BF, 9500BF, 9700BF).

Model: Dorma 9600AA 630, 9400BB 630