Corbin Russwin ED4200S MELR Narrow Stile SecureBolt Rim Exit Device w/ Motor Latch Retraction

Corbin Russwin ED4200S MELR Narrow Stile SecureBolt Rim Exit Device, Motor Latch Retraction

Specifications

Handing: Device non-handed. Trim handed.

Bar Length - Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36" (762mm-914mm) door.
Optional: 48" (1219mm) bar fits 36"-48" (914mm-1219mm) door; specify W048.

Door Thickness : 1-3/4" (44mm) standard.

Stile: Minimum width 2" (51mm).

Latchbolt: Full 3/4” (19mm) projection, 1” (25mm) wide , positive deadlocking by auxiliary bolt.

Materials: High-grade, heat-treated, corrosion-resistant nickel steel alloy. Finished parts are brass,
bronze or stainless steel; stainless steel springs; nylon bearings.

Latchbolt: Nickel steel. Slide-action deadbolt with positive deadlocking by auxiliary bolt.
Twopiece deadbolt mechanism utilizing a roll back lever which eliminates any contact (friction) with the strike during relocking.

Projection: 3-1/4" (83mm) active, 2-3/4" (70mm) dogged.

Dogging
Standard: single-point 1/4 turn hex key dogging.
Optional: less dogging; specify M51.
Optional: cylinder dogging; specify M52.
Optional: electric dogging, specify M97.

Fasteners
Standard: machine screws.
Optional: sex nuts and bolts; specify M54.

Strike: Surface mounted 3/8" (10mm) diameter roller strike, complete with positive locking plate and shims, ensuring low-friction relocking for a long, trouble-free life.

Cylinders: Cylinder not included unless specified.

Shim Kit: Optional for mounting device over raised vision light molding.

Warranty: Five-year limited.

Option
Electric Latch Retraction - MELR
The Motorized Electric Latch Retraction (MELR) exit device provides remote-controlled latch retraction that delivers quiet,
smooth operation for convenient, hassle-free egress. Easily installed in new applications and available as retrofit rail kit
assemblies for field updates, the MELR features maintenance-free design with few moving parts using 86% less power
consumption during retraction than solenoid devices. Plus, MELR is powered by a standard power supply, simplifying
installation and increasing system design flexibility.

ANSI:  Meets A156.3, Type 4 or 28, Grade 1. Meets A117.1 Accessibility Code.

UL/cUL
All devices listed for safety as panic hardware; devices comply with UL 305 standards for panic hardware.
UL symbol on active case cover indicates listing. California State Reference Code. This product has been
approved by the California State Fire Marshal pursuant to section 13144.1 of the California Health and Safety Code.

NFPA
All exit devices comply with NFPA 101 Life Safety Code.

ADA
Exit devices, lever trims and pulls comply with Americans with Disabilities Act.

Finishes: 605 - Brights Brass, 606 - Satin Brass, 612 - Satin Bronze, 625 - Bright Chrome, 626 - Satin Chrome, 630 - Satin Stainless Steel

Model: Corbin Russwin ED4200S 630 MELR, E45200S 613 MELR