Command Access MLRK1-TS Motor Latch Retract Kit for Townsteel 1100 Series

Command Access MLRK1-TS Motor Latch Retract Kit for Townsteel 1100 Series

The new MLRK1-TS is a practical and cost-effective way to convert a mechanical Townsteel ED1000 device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT’s 3-year no hassle warranty. The new unit easily hooks onto the back activating bracket and is secured with (2) screws, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. PTS allows for a smooth post-installation adjustment of the latch/latches. An optional built-in REX switch is available on all units! Last but not least, it features an updated MM4S module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done.

Specifications
Voltage:
• Voltage range – 24 to 28 VDC
• System protection – unit shutdown when voltage exceeds 28VDC
• Standard - Average Current Peak: 900A, Average Current Hold: 200mA
• High Torque - Average Current Peak: 2A, Average Current Hold: 250mA
• PTS adjustment – approx. 1/4”

Wire Run:
• 300' with 18ga wire

Device Cutdown Details
• 36” - 3”
• 48” - 5.5”

Features
• Next Generation MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• “PTS”: 5 second electronic adjustment for easy post installation adjustment
• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position
• Low Current Draw - Field switchable to “High Torque” mode
• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel
• Push-n-Go Pigtail + 6’ cable with Quick Connect for MM4S module to easily connect to power supply lead
• Optional Request-to-exit can be built-in
• 3-year “no hassle” warranty

Product Type: Exit Device Kits

Model: Command Access MLRK1-TS