Adams Rite MS1847 MS Deadlock/Deadlatch

Adams Rite MS1847 MS Deadlock/Deadlatch

The MS1847 Deadlock/Latch for ultra-narrow stile aluminum slidingdoors features a self-protecting bolt with adjustable bolt projection.

Function
A compact lock designed to fit within very narrow sliding door stiles without compromising the high degree of security that these doors need. The sturdy stainless steel bolt has two important features not usually found in sliding door hardware. First, it is adjustable: a full 3/16" [4.8 mm] lengthening or shortening of bolt projection is possible by turning an exposed screw in the face of the lock. This can compensate for considerable misalignment between door and jamb. Second, the bolt is self-protecting: if the door is closed with the bolt in the locked position, the bolt will retract immediately upon contact with the jamb. This automatic latch can prevent damage or accidental lockout.

Features
Case: Measures 1/2" x 3-3/16" x 1-1/8" [12.7 mm x 80.97 mm x 28.6 mm]. Stainless steel

Bolt: Three-ply laminated stainless steel. Designed to withstand approximately one-half ton of either horizontal or vertical force. Anti-lift bolt stops both door-from-jamb pry bar attacks and attempts to lift the door from its track.

Faceplate: Rectangular face or full radiused ends.

Face Shape, Hub Angle, Lock/Latch
(Blank) - 45 Deg. Hub Angle, Rectangular Face
02 - 45 Deg. Hub Angle, Full radiused ends
06 - Vertical Hub, Full radiused ends09 - 22.5 Deg. Hub Angle, Full radiused ends
09 - 22.5 Deg. Hub Angle, Full radiused ends11 - 45 Deg. Hub Angle, Full radiused ends, Self Latching
11 - 45 Deg. Hub Angle, Full radiused ends, Self Latching
13 - Vertical Hub, Rectangular Face, Self Latching

Latch Version: The MS1847-11 and MS1847-13 feature the same stainless steel hookbolt, but the bolt is spring-loaded for automatic latching. All dimensions and available accessories for the MS1847 Deadlocks also apply to MS1847 Deadlatches.

Operation
Cylinder pulls are available separately for keyed operation. Three hub slot positions allow installation even where jamb and stile design provides severely limited turn clearance.

Model: Adams Rite MS1847-630, MS1847-02-630, MS1847-06-630, MS1847-09-630, MS1847-10-630, MS1847-11-630, MS1847-13-630