Adams Rite 74R1M Ultraline Electric Strike for Rim Devices - Aluminum, Hollow Metal/Wood Jamb, Monitored

Adams Rite 74R1M Electric Strike, Field Selectable (Fail Safe/Fail Secure), For Rim Exit Devices, 9"X 1-3/4" Faceplate, For Aluminum, Hollow Metal or Wood Applications, Monitored

74R1 Electric Strike is designed for rim exit devices with 3/4" [19.1 mm] Pullman latchbolts. For use in aluminum, hollow metal or wood applications.

Function
These non-handed strikes feature an ultra-compact design and adjustable stainless steel keepers with over 1,500 lbs [680.4 kg] of holding force in fail secure mode. The strikes release electrically with up to 25 lbs of door preload. Single solenoid operates on 12/16/24 VDC power. Provides electrical remote control, allowing door to open without actuation of the exit device.

Monitor Switches
If a visual or other signal is required to tell an operator what the electric strike is doing, a “monitoring” strike to switch that signal on and off is required. This feature utilizes two sensor switches: one is activated by the latchbolt’s penetration of the strike and the other by the mechanism that blocks the strike’s release. These switches can also be used to interconnect two strikes in “mantrap” or interlock situations, such as elevator doors. In these cases, power to the solenoid of each strike is controlled by the switch(es) of the other so one will not unlock unless the other is locked. Each switch has both normally open and normally closed leads to they can be wired to either make or break a circuit.

Certifications
UL 1034 Burglary-Resistant Listed and Suitable for Outdoor Use
UL 294
ULC-S319
ANSI/BHMA A156.18
ANSI/BHMA A156.31 Electric Strikes and Frame Mounted Actuators, Grade 1

Features: 

Case: 74R1: 1-13/32" x 3-3/8" x 1-1/16" deep [35.7 mm x 85.7 mm x 27 mm deep]

Faceplate: Not separate
74R1: 1-3/4" x 9 x 11/16" [44.5 mm x 228.6 mm x 17.5 mm]

Electrical Voltage: Field selectable to match power source of 12/24 VDC. VA7400-16 VDC voltage adapter required when using 16 VDC power, available separately. Equipped with a quick connect plug-in type connector.

Current Draw:
.44A at 12 VDC
.46A at 16 VDC - Requires 16 DC adapter (P/N VA7400-16VDC)
.23A at 24 VDC

Fail Safe | Fail Secure: Field selectable fail safe/fail secure

Strike Opening: Bolt retaining keeper is stainless steel.
74R1: 5/8" x 1-7/16" x 9/16" deep [15.9 mm x 36.5 mm x 14.3 mm deep]. Strike accepts Pullman latch of exit devices without deadlocking bolts.

Strike Lip: Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge.

Latchbolt Projection: 74R1: 3/4" [19.1 mm]

Standard Package: Individually boxed with mounting plate shims, mounting screws, and installation instructions.

Model: Adams Rite 74R1M130, 74R1M121, 74R1M119