Adams Rite 7170 Electric Strike, Flat Faceplate w/ Square Corners for Hollow Metal or Wood Jamb

Adams Rite 7170 Electric Strike,  For Hollow Metal or Wood Applications, 1-1/4" x 4-7/8" Flat Faceplate with Square Corners, Lip Extension 1-1/16" or Less

7170 Electric Strikes with 4-7/8" [123.8 mm] faceplates are designed for use with mortise or cylindrical type locksets with up to 3/4" [19.1 mm] latchbolt projection without deadbolt. 7170 Electric Strikes are for use in hollow metal or wood applications.

Function
Remote electrical control of hollow metal/wood doors (7170) equipped with a mortise or cylindrical lockset with up to 3/4" [19.1 mm] latchbolt projection without deadbolt. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself. The electric strike must be positioned to accommodate offset mortise latches during installation. Please refer to installation instructions or contact factory for more information.

Certifications: UL 1034 burglary-resistant listed. UL 294 (6th Edition) listed

Features: 

Case: 1" x 3-3/8" x 1-7/8" deep [25.4 mm x 85.7 mm x 47.6 mm].

Faceplate: 1-1/4" x 4-7/8" [31.8 mm x 123.8 mm]. Available in a variety of architectural finishes.
7160: Flat with square corners

Electrical Voltage: Available in 12, 16, or 24 Volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Current Draw: 0.33 A at 12 VDC
                       0.1 7A at 24 VDC

Fail Safe | Fail Secure: Field selectable at time of installation. However, AC intermittent solenoid must not be used continuously in either.

Strike Opening: Bolt retaining keeper is stainless steel. Strike location must be centered on latchbolt.
7170: 5/8" x 1-7/16" x 5/8" deep [15.9 mm x 36.5 mm x 15.9 mm deep].

Strike Lip: Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.

Latchbolt Projection: 3/4" [19.1 mm]

Standard Package: Individually boxed with mounting screws.
7170 includes mounting clips and adhesive shims for use when welded tabs are omitted.

Model: Adams Rite 7170-310-628-00, 7170-410-628-00, 7170-510-628-00