Skip to main content

FREE SHIPPING ALL ORDERS $450 AND UP!

SAME DAY & EXPEDITED SHIPPING AVAILABLE

Adams Rite 7160 Electric Strike, Flat Faceplate w/ Radius Corners for Aluminum Jamb

In Stock
$168.70

FREE SHIPPING

SKU: 7160
Series: 7160
Face Plate Length: 1-1/4" x 4-7/8"
Lip Extension: 1-1/16" or Less
Lockset type: For Mortise or Cylindrical Locks
Choose Options:
Hurry! Only left

Adams Rite 7160 Electric Strike,  For Aluminum Applications, 1-1/4" x 4-7/8" Flat Faceplate with Radius Corners, Lip Extension 1-1/16" or Less

7160 Electric Strikes with 4-7/8" [123.8 mm] faceplates are designed for use with mortise or cylindrical type locksets with up to 3/4" [19.1 mm] latchbolt projection without deadbolt. 7160 Electric Strikes are for use in aluminum applications.

Function
Remote electrical control of narrow stile aluminum doors (7160equipped with a mortise or cylindrical lockset with up to 3/4" [19.1 mm] latchbolt projection without deadbolt. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself. The electric strike must be positioned to accommodate offset mortise latches during installation. Please refer to installation instructions or contact factory for more information.

Certifications: UL 1034 burglary-resistant listed. UL 294 (6th Edition) listed

Features: 

Case: 1" x 3-3/8" x 1-7/8" deep [25.4 mm x 85.7 mm x 47.6 mm].

Faceplate: 1-1/4" x 4-7/8" [31.8 mm x 123.8 mm]. Available in a variety of architectural finishes.
7160: Flat with radius corners

Electrical Voltage: Available in 12, 16, or 24 Volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.

Current Draw: 0.33 A at 12 VDC
                       0.1 7A at 24 VDC

Fail Safe | Fail Secure: Field selectable at time of installation. However, AC intermittent solenoid must not be used continuously in either.

Strike Opening: Bolt retaining keeper is stainless steel. Strike location must be centered on latchbolt.
7160: 3/4" x 1-7/16" x 5/8" deep [19.1 mm x 36.5 mm x 15.9 mm deep].

Strike Lip: Basic strike has lip of proper length for 1-3/4" [44.5 mm] thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.

Latchbolt Projection: 3/4" [19.1 mm]

Standard Package: Individually boxed with mounting screws.
7160 includes mounting clips, adhesive shims to accommodate jamb or stile extrusion thickness greater or less than nominal 1/8" [3.2 mm].

Model: Adams Rite 7160-310-628-00, 7160-410-628-00, 7160-510-628-00

Free Ground Shipping

orders $450 and up

Easy Returns

no question asked

Quantity Discounts

request a quote

Outstanding Customer Service